10K/14K/18K Gold Jewelry Manufacturer
10K/14K/18K Gold Jewelry Manufacturer Made to Order: Carton Cube, Duty and the Freigh - HOLYCOME
10K/14K/18K Gold Jewelry Manufacturer: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Made to Order Quote Looks Cheap Until It Lands
In July, a US buyer of 10K/14K/18K Gold Jewelry Manufacturer ordered 50 10K/14K/18K Gold Jewelry Manufacturer and asked for the same cast or hand-finished as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, which is how the Made to Order account reads it at USD 56-400.
The defect did not surprise us. Stamp accuracy is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming 10K/14K/18K Gold Jewelry Manufacturer, quoted at USD 56-400 per piece in single-piece foam box.
We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on assay within 0.3K of the stamp and color match to the master chip, certified IGI report and packed single-piece foam box at 50 pieces, certified IGI report and packed single-piece foam box at 50 pieces.
The Made-to-Order Path for 10K/14K/18K Gold Jewelry Manufacturer
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which is USD 56-400 on the Made to Order schedule.
Twenty days is realistic for a new 10K/14K/18K Gold Jewelry Manufacturer when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is USD 56-400 on the Made to Order schedule.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, with IGI report and single-piece foam box stated on the same sheet.
What Fails First on 10K/14K/18K Gold Jewelry Manufacturer
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, which is how the Made to Order account reads it at USD 56-400.
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, shipped as single-piece foam box and certified IGI report.
In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, on a 50-piece Made to Order order at USD 56-400.
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, which is USD 56-400 on the Made to Order schedule.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Made to Order file records at USD 56-400 in single-piece foam box.
The Measurements Behind a USD 56-400 Quote
Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on 10K/14K/18K Gold Jewelry Manufacturer, and three of them cost nothing to specify, the figure being USD 56-400 for a 50-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Each line is a gauge, not a slogan. A supplier who cannot quote a number for stamp accuracy is quoting an opinion about 10K/14K/18K Gold Jewelry Manufacturer, shipped as single-piece foam box and certified IGI report, and at USD 56-400 for 50 pieces that is the number the buyer signs.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 56-400 for the 50-piece Made to Order run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 56-400 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 56-400 for 50 pieces that is the number the buyer signs.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Made to Order account reads it at USD 56-400.
What a USD 56-400 Quote Hides
The Made to Order price of 50 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, which is how the Made to Order account reads it at USD 56-400.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for 10K/14K/18K Gold Jewelry Manufacturer | 34% | Alloy choice and casting yield |
| Stone or melee for 10K/14K/18K Gold Jewelry Manufacturer | 25% | Sieve range and lot batching |
| Setting and finishing labor for 10K/14K/18K Gold Jewelry Manufacturer | 22% | Jig design and bench minutes |
| Plating, polish and QC for 10K/14K/18K Gold Jewelry Manufacturer | 15% | Per-tray versus per-piece checks |
| Packaging for 10K/14K/18K Gold Jewelry Manufacturer | 4% | single-piece foam box |
Break the USD 56-400 quote into these five lines and the comparison stops being rhetorical.
What a Report Proves and What It Does Not
Nobody quotes it for 10K/14K/18K Gold Jewelry Manufacturer until something goes wrong, which is exactly why it belongs in the first email, with IGI report and single-piece foam box stated on the same sheet.
Three numbers decide it for 10K/14K/18K Gold Jewelry Manufacturer: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
We send a one-page sheet with every 10K/14K/18K Gold Jewelry Manufacturer quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
The Sample Approval That Survives Production
It is not a marketing point on 10K/14K/18K Gold Jewelry Manufacturer. It is the number that decides whether the second order happens, shipped as single-piece foam box and certified IGI report.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on 10K/14K/18K Gold Jewelry Manufacturer and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which the Made to Order file records at USD 56-400 in single-piece foam box.
We would rather lose a first order of 10K/14K/18K Gold Jewelry Manufacturer on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, quoted at USD 56-400 per piece in single-piece foam box.
A 50-Piece Test Run
A test run at 50 pieces tells you three things: whether stamp accuracy is controlled, whether packing survives freight, and whether the count is honest, which is how the Made to Order account reads it at USD 56-400.
Put the reject rule in writing before the deposit. The Made to Order conversation after arrival is shorter when the rule is already on the order, which is USD 56-400 on the Made to Order schedule.
The Dock Check on 10K/14K/18K Gold Jewelry Manufacturer
Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 56-400 per piece the choice is a cash-flow decision.
DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, and the Made to Order quote for it sits at USD 56-400.
On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
From Spec to single-piece foam box
On 50 pieces of 10K/14K/18K Gold Jewelry Manufacturer the calendar starts at the signed spec, not at the deposit, and it ends with single-piece foam box on a pallet, which is how the Made to Order account reads it at USD 56-400.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A 50-piece first order at USD 56-400 is a measurement of assay within 0.3K of the stamp, not a commitment to the range.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.
How long does a reorder of the same 10K/14K/18K Gold Jewelry Manufacturer take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white 10K/14K/18K Gold Jewelry Manufacturer, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, shipped as single-piece foam box and certified IGI report.
How is 10K/14K/18K Gold Jewelry Manufacturer packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is USD 56-400 on the Made to Order schedule.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.
Next Step
Send a photo or a drawing of the piece you want in single-piece foam box. We answer with a price, a calendar and the four measurements above, on a 50-piece Made to Order order at USD 56-400.
The factory behind 10K/14K/18K Gold Jewelry Manufacturer here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, quoted at USD 56-400 per piece in single-piece foam box.
Related reading: 10K/14K/18K Gold Jewelry Manufacturer Private Label Carton: Alloy, Karat and the Cost - HOLYCOME 10K/14K/18K Gold Jewelry Manufacturer Q4 Holiday Stock: Sample to Container: The Real - HOLYCOME
