10K Gold Jewelry
10K Gold Jewelry Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME
10K Gold Jewelry: tolerances, cost structure and the reject rule for US wholesale buyers.
The Sample Approval That Survives Production
Last June, a US buyer of 10K Gold Jewelry placed 200 10K Gold Jewelry against a sample signed in October. The first container landed with 9 pieces that failed on stamp accuracy alone, and USD 30-100 landed on the buyer's P&L before a single unit sold, the figure being USD 45-320 for a 200-piece run.
The incoming report named stamp accuracy and the purchase order did not. On a Amazon FBA Ready run that gap between documents is the whole reason a tray fails inspection, which is how the Amazon FBA Ready account reads it at USD 45-320.
We did not touch the retail price. We changed what travels with the retail-ready box with FNSKU label carton, and the Amazon FBA Ready account stopped re-inspecting every tray, priced at USD 45-320 for the 200-piece Amazon FBA Ready run.
What US buyers Check Before They Sign
A quote for 10K Gold Jewelry usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, on a 200-piece Amazon FBA Ready order at USD 45-320.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about 10K Gold Jewelry, with GRA report and retail-ready box with FNSKU label stated on the same sheet, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
Where USD 45-320 Per Piece Actually Goes
At USD 45-320 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for 10K Gold Jewelry | 30% | Alloy choice and casting yield |
| Stone or melee for 10K Gold Jewelry | 20% | Sieve range and lot batching |
| Setting and finishing labor for 10K Gold Jewelry | 19% | Jig design and bench minutes |
| Plating, polish and QC for 10K Gold Jewelry | 12% | Per-tray versus per-piece checks |
| Packaging for 10K Gold Jewelry | 19% | retail-ready box with FNSKU label |
A supplier with no bench minutes per piece has never costed 10K Gold Jewelry. Ask for minutes and the reject rule before you ask for a discount, and the Amazon FBA Ready quote for it sits at USD 45-320.
The Three Failures We See Most in Incoming Samples
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and the Amazon FBA Ready quote for it sits at USD 45-320.
In a 200-piece run this typically shows on 8 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, and the Amazon FBA Ready quote for it sits at USD 45-320.
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail-ready box with FNSKU label and certified GRA report.
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 45-320 for a 200-piece run.
Listing 10K Gold Jewelry on Amazon FBA Without a Takedown
Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, and at USD 45-320 for 200 pieces that is the number the buyer signs.
For 10K Gold Jewelry the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
Weight and dimension limits decide your freight per unit more than the piece cost does. A single 10K Gold Jewelry in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 45-320 quote.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 45-320 on the Amazon FBA Ready schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 45-320 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Amazon FBA Ready account reads it at USD 45-320.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 45-320 for a 200-piece run.
The Reject Tray Policy That Decides a Partnership
Nobody quotes it for 10K Gold Jewelry until something goes wrong, which is exactly why it belongs in the first email, the figure being USD 45-320 for a 200-piece run.
At 200 pieces the arithmetic on 10K Gold Jewelry changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
We quote both a first-run price and a reorder price for 10K Gold Jewelry on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, shipped as retail-ready box with FNSKU label and certified GRA report.
What the Quote Actually Covers
It is not a marketing point on 10K Gold Jewelry. It is the number that decides whether the second order happens, and at USD 45-320 for 200 pieces that is the number the buyer signs.
Buyers who get this wrong on 10K Gold Jewelry usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of 10K Gold Jewelry is scheduled behind other orders, the figure being USD 45-320 for a 200-piece run.
Our approach is to write the rule into the 10K Gold Jewelry spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
How a Repeat Order Gets Built
Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of 10K Gold Jewelry, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 45-320.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Amazon FBA Ready runs, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
What This Means for a First Order
A first order of 50 pieces per design is a measurement, not a purchase. It shows how assay within 0.3K of the stamp and color match to the master chip behaves on this line and whether the QC sheet matches the carton, the figure being USD 45-320 for a 200-piece run.
Six weeks of testing is cheaper than a season of returns on 10K Gold Jewelry. That is the entire argument for a small first order, shipped as retail-ready box with FNSKU label and certified GRA report, and at USD 45-320 for 200 pieces that is the number the buyer signs.
Freight, Duty and the Arrival Check
At 200 pieces the carton count drives freight more than the weight. retail-ready box with FNSKU label packs tighter than a display tray and saves a pallet position, which is how the Amazon FBA Ready account reads it at USD 45-320.
FOB Guangzhou or Shenzhen is the default on 10K Gold Jewelry. Buyers new to the US market take DDP once and switch after they see the breakdown, quoted at USD 45-320 per piece in retail-ready box with FNSKU label.
If stamp accuracy shows in the arrival check, the retained tray decides ownership. Keep the GRA report sheet beside the packing list, and the Amazon FBA Ready quote for it sits at USD 45-320.
Frequently Asked Questions
What is the minimum order for 10K Gold Jewelry?
50 pieces per 10K Gold Jewelry. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
Do you supply certificates for 10K Gold Jewelry?
GRA report on 10K Gold Jewelry above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, which is how the Amazon FBA Ready account reads it at USD 45-320.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if stamp accuracy shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and at USD 45-320 for 200 pieces that is the number the buyer signs.
What is the minimum order for 10K Gold Jewelry?
50 pieces per 10K Gold Jewelry. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Amazon FBA Ready file records at USD 45-320 in retail-ready box with FNSKU label.
Next Step
Put your current quote beside ours on assay within 0.3K of the stamp and color match to the master chip, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, and at USD 45-320 for 200 pieces that is the number the buyer signs.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, on a 200-piece Amazon FBA Ready order at USD 45-320.
Related reading: 10K Gold Jewelry Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME 14K Gold Jewelry Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME
