Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

10K Gold Jewelry

10K Gold Jewelry Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME

Holycome Trade Desk · November 9, 2026 · 9 min read

10K Gold Jewelry: tolerances, cost structure and the reject rule for US wholesale buyers.

10K Gold Jewelry Bridal Boutique: The Reject Tray Policy That Decides a Partnership - HOLYCOME

Why the Bridal Boutique Quote Looks Cheap Until It Lands

Two buyers ordered the same 10K Gold Jewelry in the same month. One paid 9% less and absorbed 23 rejects out of 50 pieces; the other paid our quote and shipped clean. The difference was stamp accuracy, and it was measurable on both benches, shipped as two-piece bridal box and certified IGI report.

Nothing in that rejection was exotic. At USD 51-368 per piece and 50 pieces on the order, a stamp accuracy rate of two percent is a costing error rather than a quality mystery.

10K Gold Jewelry wholesale piece from the HOLYCOME line in Wuzhou

Cost of the fix was about 21 seconds per piece. On 50 pieces that is a few hours at the bench and the whole claim file disappears, which the Bridal Boutique file records at USD 51-368 in two-piece bridal box.

The Measurements Behind a USD 51-368 Quote

Four numbers separate a 50-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, quoted at USD 51-368 per piece in two-piece bridal box.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later

None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, quoted at USD 51-368 per piece in two-piece bridal box.

What Fails First on 10K Gold Jewelry

solder joint porosity

A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, quoted at USD 51-368 per piece in two-piece bridal box.

10K Gold Jewelry setting and finish detail on a HOLYCOME factory sample

The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Bridal Boutique quote for it sits at USD 51-368.

stamp accuracy

A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, the figure being USD 51-368 for a 50-piece run.

Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 51-368 for the 50-piece Bridal Boutique run.

alloy color drift

Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, with IGI report and two-piece bridal box stated on the same sheet.

In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, shipped as two-piece bridal box and certified IGI report.

What a USD 51-368 Quote Hides

The cost of a 10K Gold Jewelry in the USD 51-368 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.

Cost lineShareWhat moves it
Base metal or alloy for 10K Gold Jewelry34%Alloy choice and casting yield
Stone or melee for 10K Gold Jewelry25%Sieve range and lot batching
Setting and finishing labor for 10K Gold Jewelry22%Jig design and bench minutes
Plating, polish and QC for 10K Gold Jewelry15%Per-tray versus per-piece checks
Packaging for 10K Gold Jewelry4%two-piece bridal box

If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, the figure being USD 51-368 for a 50-piece run.

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Bridal Boutique order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Bridal Boutique account reads it at USD 51-368.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 51-368 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the two-piece bridal box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 51-368 for a 50-piece run.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with IGI report and two-piece bridal box stated on the same sheet.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 51-368 for the 50-piece Bridal Boutique run.

Bridal Boutique Consignment and the Sample Tray

A bridal account buys a sample tray first and stock later. The tray has to cover the sizes the boutique actually fits, which in practice means one sample in each half size from five to eight, so eight pieces per design rather than one, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 51-368.

Consignment terms change what you order. A boutique that takes 10K Gold Jewelry on consignment wants a marked retail price on the tag, an exchange window, and a certificate in the box the bride can photograph. We supply the IGI report in a card sleeve for exactly that reason, which is USD 51-368 on the Bridal Boutique schedule.

The calendar matters more than the price. Brides buy between January and April for a summer wedding, so the tray has to be on the counter by December. A March order arrives after the decision has already been made, and the Bridal Boutique quote for it sits at USD 51-368.

MOQ, Mixed Designs and the Real First Order

The short version for 10K Gold Jewelry: it is arithmetic, not relationship. The long version is below, which is how the Bridal Boutique account reads it at USD 51-368.

The buyers who get the most out of 10K Gold Jewelry treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, which is USD 51-368 on the Bridal Boutique schedule.

We support it directly on 10K Gold Jewelry: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, which is USD 51-368 on the Bridal Boutique schedule.

Sample to Container: The Real Calendar

Every year we see the same omission in 10K Gold Jewelry spec sheets, and every year it costs a buyer a season, and the Bridal Boutique quote for it sits at USD 51-368.

What buyers underestimate on 10K Gold Jewelry is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, and the Bridal Boutique quote for it sits at USD 51-368.

We plan a 3-5% buffer on first runs of 10K Gold Jewelry and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 51-368.

The Dock Check on 10K Gold Jewelry

We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. IGI report travels with the shipping documents, with IGI report and two-piece bridal box stated on the same sheet.

DDP removes the duty invoice that arrives after the carton clears, which matters on a first Bridal Boutique order at USD 51-368.

Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, with IGI report and two-piece bridal box stated on the same sheet, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 51-368.

From Spec to two-piece bridal box

The calendar below is what we quote on a 50-piece Bridal Boutique run of 10K Gold Jewelry. It starts when the spec is signed, not when the deposit clears, the figure being USD 51-368 for a 50-piece run.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A first order of 50 pieces is a measurement, not a purchase. It tells you what assay within 0.3K of the stamp looks like from this bench, and at USD 51-368 for 50 pieces that is the number the buyer signs.

A 50-Piece Test Run

At 50 pieces inside two-piece bridal box, the first order reads sell-through without betting the season on one model, on a 50-piece Bridal Boutique order at USD 51-368.

Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, and the Bridal Boutique quote for it sits at USD 51-368.

Frequently Asked Questions

Do you supply certificates for 10K Gold Jewelry?

IGI report on 10K Gold Jewelry above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, quoted at USD 51-368 per piece in two-piece bridal box.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if stamp accuracy shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, quoted at USD 51-368 per piece in two-piece bridal box.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 51-368.

What is the minimum order for 10K Gold Jewelry?

50 pieces per 10K Gold Jewelry. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which is USD 51-368 on the Bridal Boutique schedule.

Do you supply certificates for 10K Gold Jewelry?

IGI report on 10K Gold Jewelry above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, quoted at USD 51-368 per piece in two-piece bridal box.

Next Step

If you are quoting 10K Gold Jewelry against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 51-368.

The factory behind 10K Gold Jewelry here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, certified IGI report and packed two-piece bridal box at 50 pieces.

Related reading: 10K Gold Jewelry Distributor Tier: What the Quote Actually Covers - HOLYCOME 14K Gold Jewelry Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME

Topics: 10K Gold Jewelry Bridal Boutique

Sourcing lab grown stones at wholesale?

Send us your specifications and target quantity — you will get a costed factory quotation within 12 working hours.

Request a quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Shop the guide

Wholesale items related to this guide

All products

Keep reading

Related buying guides

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Products Search Quote WhatsApp