925 Sterling Silver Jewelry Wholesale
925 Sterling Silver Jewelry Wholesale Private Label Carton: Alloy, Karat and the Cost - HOLYCOME
925 Sterling Silver Jewelry Wholesale: tolerances, cost structure and the reject rule for US wholesale buyers.
Alloy, Karat and the Cost of a Color Change in the Private Label Carton Program
A US buyer of 925 Sterling Silver Jewelry Wholesale came to us after 200 925 Sterling Silver Jewelry Wholesale from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: tarnish in transit had drifted far enough that the buyer's own bench could not correct it without recutting, which is USD 9-50 on the Private Label Carton schedule.
The bench did not miss the defect, it was never asked to look for it. Tarnish in transit was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, with GRA report and private-label carton with hangtag stated on the same sheet, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
The rebuild held the USD 9-50 quote and changed the plating log, the gauge and the tray rule. Second run shipped private-label carton with hangtag with zero rejects.
Four Spec Lines a Private Label Carton Buyer Checks
A Private Label Carton quote that states only metal and stone size leaves tarnish in transit undefined, and undefined is what gets rejected on arrival, priced at USD 9-50 for the 200-piece Private Label Carton run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Nothing here adds cost at USD 9-50. It adds documentation, and documentation is what the private-label carton with hangtag carton is missing.
Private Label Packaging for 925 Sterling Silver Jewelry Wholesale
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, quoted at USD 9-50 per piece in private-label carton with hangtag.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin 925 Sterling Silver Jewelry Wholesale. Below 0.8 mm of shank width we recommend the hangtag only, priced at USD 9-50 for the 200-piece Private Label Carton run.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, shipped as private-label carton with hangtag and certified GRA report.
Cost Split on a Private Label Carton Piece at USD 9-50
Buyers assume the stone dominates the cost of a 925 Sterling Silver Jewelry Wholesale. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, which is how the Private Label Carton account reads it at USD 9-50.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for 925 Sterling Silver Jewelry Wholesale | 32% | Alloy choice and casting yield |
| Stone or melee for 925 Sterling Silver Jewelry Wholesale | 23% | Sieve range and lot batching |
| Setting and finishing labor for 925 Sterling Silver Jewelry Wholesale | 21% | Jig design and bench minutes |
| Plating, polish and QC for 925 Sterling Silver Jewelry Wholesale | 14% | Per-tray versus per-piece checks |
| Packaging for 925 Sterling Silver Jewelry Wholesale | 10% | private-label carton with hangtag |
The cheapest quote for 925 Sterling Silver Jewelry Wholesale usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
Three Failures That Reach the Private Label Carton Bench
weight shortfall
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, with GRA report and private-label carton with hangtag stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, which is USD 9-50 on the Private Label Carton schedule.
tarnish in transit
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, which is USD 9-50 on the Private Label Carton schedule.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, on a 200-piece Private Label Carton order at USD 9-50.
rhodium adhesion
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, which is how the Private Label Carton account reads it at USD 9-50.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Private Label Carton account reads it at USD 9-50.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 9-50 for the 200-piece Private Label Carton run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 9-50 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 9-50 per piece in private-label carton with hangtag.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with GRA report and private-label carton with hangtag stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 9-50 on the Private Label Carton schedule.
The Sample Approval That Survives Production
Buyers ask it in the first call about 925 Sterling Silver Jewelry Wholesale and rarely get a number they can put in a spreadsheet, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 9-50.
The commercial version of this question for 925 Sterling Silver Jewelry Wholesale is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, and at USD 9-50 for 200 pieces that is the number the buyer signs.
That clause matters more than a discount on 925 Sterling Silver Jewelry Wholesale. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, which is how the Private Label Carton account reads it at USD 9-50.
How the Second Order Becomes Cheaper
The answer for 925 Sterling Silver Jewelry Wholesale depends on four variables, and three of them are under the buyer's control, which is how the Private Label Carton account reads it at USD 9-50.
We run this check per tray rather than per carton because the defect that matters on 925 Sterling Silver Jewelry Wholesale is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, certified GRA report and packed private-label carton with hangtag at 200 pieces.
The report the buyer receives states the count per tray, the measured average and the outlier count for 925 Sterling Silver Jewelry Wholesale. It is deliberately unglamorous, and it is the document that settles most disputes before they start, the figure being USD 9-50 for a 200-piece run.
The Calendar Behind a Private Label Carton Run
The calendar below is what we quote on a 200-piece run of 925 Sterling Silver Jewelry Wholesale. It starts when the spec is signed, not when the deposit clears, and the Private Label Carton quote for it sits at USD 9-50.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ stays at 50 pieces per design on the Private Label Carton program, low enough to test a category and high enough to keep the casting line accountable, which is how the Private Label Carton account reads it at USD 9-50.
The First Private Label Carton Order
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which is USD 9-50 on the Private Label Carton schedule.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 200 pieces the calendar is the same on every Private Label Carton run, quoted at USD 9-50 per piece in private-label carton with hangtag.
Getting private-label carton with hangtag to US wholesale
For a Private Label Carton order at 200 pieces the carton count decides the freight more than the weight does. private-label carton with hangtag packs tighter than a display tray, which the Private Label Carton file records at USD 9-50 in private-label carton with hangtag.
The freight rate matters less than the clearance terms at USD 9-50 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of private-label carton with hangtag and measure ten pieces against silver assay at 92.5% minimum. Twenty minutes here saves a season, which is how the Private Label Carton account reads it at USD 9-50.
Frequently Asked Questions
What is the minimum order for 925 Sterling Silver Jewelry Wholesale?
50 pieces per 925 Sterling Silver Jewelry Wholesale. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 9-50 for a 200-piece run.
Do you supply certificates for 925 Sterling Silver Jewelry Wholesale?
GRA report on 925 Sterling Silver Jewelry Wholesale above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of silver assay at 92.5% minimum, which is what a counter or a listing actually needs, with GRA report and private-label carton with hangtag stated on the same sheet.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if tarnish in transit shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, shipped as private-label carton with hangtag and certified GRA report.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, with GRA report and private-label carton with hangtag stated on the same sheet.
What is the minimum order for 925 Sterling Silver Jewelry Wholesale?
50 pieces per 925 Sterling Silver Jewelry Wholesale. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 9-50 for a 200-piece run.
Next Step
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, with GRA report and private-label carton with hangtag stated on the same sheet, and at USD 9-50 for 200 pieces that is the number the buyer signs.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across 925 Sterling Silver Jewelry Wholesale and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 9-50 per piece in private-label carton with hangtag.
Related reading: 925 Sterling Silver Jewelry Wholesale Vermeil Upgrade: What a Report Proves and What - HOLYCOME 925 Sterling Silver Jewelry Wholesale Valentine Program: AQL, Tray Checks and What a - HOLYCOME