Best Sellers
Best Sellers Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buy - HOLYCOME
Best Sellers: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Made to Order Quote Looks Cheap Until It Lands
In November, a US buyer of best Sellers ordered 50 best Sellers and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, priced at USD 47-262 for the 50-piece Made to Order run.
Nothing in that rejection was exotic. At USD 47-262 per piece and 50 pieces on the order, a prong geometry rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 22 seconds per piece. On 50 pieces that is a few hours at the bench and the whole claim file disappears, which is USD 47-262 on the Made to Order schedule.
The Made-to-Order Path for best Sellers
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Twenty days is realistic for a new best Seller when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, with IGI report and single-piece foam box stated on the same sheet.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, on a 50-piece Made to Order order at USD 47-262.
What Fails First on best Sellers
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, the figure being USD 47-262 for a 50-piece run.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, with IGI report and single-piece foam box stated on the same sheet.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is how the Made to Order account reads it at USD 47-262.
In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and at USD 47-262 for 50 pieces that is the number the buyer signs.
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is USD 47-262 on the Made to Order schedule.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as single-piece foam box and certified IGI report.
The Measurements Behind a USD 47-262 Quote
Four numbers separate a 50-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, the figure being USD 47-262 for a 50-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, the figure being USD 47-262 for a 50-piece run.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with IGI report and single-piece foam box stated on the same sheet.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 47-262 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as single-piece foam box and certified IGI report.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, the figure being USD 47-262 for a 50-piece run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
What a USD 47-262 Quote Hides
The cost of a best Seller in the USD 47-262 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for best Sellers | 34% | Alloy choice and casting yield |
| Stone or melee for best Sellers | 25% | Sieve range and lot batching |
| Setting and finishing labor for best Sellers | 22% | Jig design and bench minutes |
| Plating, polish and QC for best Sellers | 15% | Per-tray versus per-piece checks |
| Packaging for best Sellers | 4% | single-piece foam box |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, and at USD 47-262 for 50 pieces that is the number the buyer signs.
What a Report Proves and What It Does Not
Nobody quotes it for best Sellers until something goes wrong, which is exactly why it belongs in the first email, which is how the Made to Order account reads it at USD 47-262.
Three numbers decide it for best Sellers: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, certified IGI report and packed single-piece foam box at 50 pieces.
We send a one-page sheet with every best Sellers quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, certified IGI report and packed single-piece foam box at 50 pieces.
The Sample Approval That Survives Production
It is not a marketing point on best Sellers. It is the number that decides whether the second order happens, and the Made to Order quote for it sits at USD 47-262.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on best Sellers and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, and at USD 47-262 for 50 pieces that is the number the buyer signs.
We would rather lose a first order of best Sellers on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, which is USD 47-262 on the Made to Order schedule.
A 50-Piece Test Run
At 50 pieces inside single-piece foam box, the first order reads sell-through without betting the season on one model, and 50 pieces leaves Wuzhou in single-piece foam box at USD 47-262.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, which is how the Made to Order account reads it at USD 47-262.
The Dock Check on best Sellers
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. IGI report travels with the shipping documents, and the Made to Order quote for it sits at USD 47-262.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Made to Order order at USD 47-262.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, and the Made to Order quote for it sits at USD 47-262.
From Spec to single-piece foam box
The calendar below is what we quote on a 50-piece Made to Order run of best Sellers. It starts when the spec is signed, not when the deposit clears, with IGI report and single-piece foam box stated on the same sheet.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A first order of 50 pieces is a measurement, not a purchase. It tells you what stone retention after a 40-cycle wear test looks like from this bench, on a 50-piece Made to Order order at USD 47-262.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 47-262 per piece in single-piece foam box.
How long does a reorder of the same best Seller take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Made to Order quote for it sits at USD 47-262.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white best Sellers, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Made to Order account reads it at USD 47-262.
How is best Sellers packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 47-262 for 50 pieces that is the number the buyer signs.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 47-262 per piece in single-piece foam box.
Next Step
If you are quoting best Sellers against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, which the Made to Order file records at USD 47-262 in single-piece foam box.
The factory behind best Sellers here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, priced at USD 47-262 for the 50-piece Made to Order run.
Related reading: Best Sellers Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME Best Sellers Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME
