Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

Bridal Ring Sets

Bridal Ring Sets Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

Holycome Trade Desk · November 9, 2026 · 9 min read

Bridal Ring Sets: tolerances, cost structure and the reject rule for US wholesale buyers.

Bridal Ring Sets Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME

Why the Valentine Program Quote Looks Cheap Until It Lands

In July, a US buyer of bridal Ring Sets ordered 300 bridal Ring Sets and asked for the same bridal sets as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, and 300 pieces leaves Wuzhou in heart gift box at USD 72-470.

Nothing in that rejection was exotic. At USD 72-470 per piece and 300 pieces on the order, a metal lot mismatch rate of two percent is a costing error rather than a quality mystery.

Bridal Ring Sets wholesale piece from the HOLYCOME line in Wuzhou

Cost of the fix was about 28 seconds per piece. On 300 pieces that is a few hours at the bench and the whole claim file disappears, on a 300-piece Valentine Program order at USD 72-470.

The Measurements Behind a USD 72-470 Quote

Four numbers separate a 300-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, which is USD 72-470 on the Valentine Program schedule.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later

None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, priced at USD 72-470 for the 300-piece Valentine Program run.

What a USD 72-470 Quote Hides

The cost of a bridal Ring Set in the USD 72-470 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.

Bridal Ring Sets setting and finish detail on a HOLYCOME factory sample
Cost lineShareWhat moves it
Base metal or alloy for bridal Ring Sets34%Alloy choice and casting yield
Stone or melee for bridal Ring Sets25%Sieve range and lot batching
Setting and finishing labor for bridal Ring Sets22%Jig design and bench minutes
Plating, polish and QC for bridal Ring Sets15%Per-tray versus per-piece checks
Packaging for bridal Ring Sets4%heart gift box

If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, and 300 pieces leaves Wuzhou in heart gift box at USD 72-470.

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 300-piece Valentine Program order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 72-470 per piece in heart gift box.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 72-470 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the heart gift box format at 300 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 300 pieces leaves Wuzhou in heart gift box at USD 72-470.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified IGI report and packed heart gift box at 300 pieces.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as heart gift box and certified IGI report.

What Fails First on bridal Ring Sets

metal lot mismatch

A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, which is how the Valentine Program account reads it at USD 72-470.

Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 72-470 for the 300-piece Valentine Program run.

stone count variance

A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, with IGI report and heart gift box stated on the same sheet.

In a 300-piece run this typically shows on 17 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, with IGI report and heart gift box stated on the same sheet.

box fit

A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, certified IGI report and packed heart gift box at 300 pieces.

The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 72-470 for a 300-piece run.

AQL, Tray Checks and What a QC Report Should Say

On bridal Ring Sets, the cheapest answer is rarely the cheapest outcome once the second season is counted, and 300 pieces leaves Wuzhou in heart gift box at USD 72-470.

At 300 pieces the arithmetic on bridal Ring Sets changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, and the Valentine Program quote for it sits at USD 72-470.

We quote both a first-run price and a reorder price for bridal Ring Sets on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, and the Valentine Program quote for it sits at USD 72-470.

Carton Cube, Duty and the Freight Line That Surprises Buyers

A buyer who understands this about bridal Ring Sets negotiates differently, and usually negotiates less, the figure being USD 72-470 for a 300-piece run.

One practical note on timing for bridal Ring Sets: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is USD 72-470 on the Valentine Program schedule.

We date the bridal Ring Sets proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, the figure being USD 72-470 for a 300-piece run.

Valentine Window for bridal Ring Sets

The Valentine window is short and unforgiving: stock has to be in the warehouse by the last week of January or the season is gone. That puts the production order in the second week of December, ahead of the Lunar New Year slowdown, on a 300-piece Valentine Program order at USD 72-470.

Paired designs move better than single pieces here. A matching pair of bridal Ring Sets, boxed together with two cards, converts at the same retail price as two singles and costs about nine percent more to make, quoted at USD 72-470 per piece in heart gift box.

Photography has to be red-and-white neutral. A bridal Ring Set shot on a red silk background reads as a gift in a listing thumbnail, and that is the only image most buyers will ever see, priced at USD 72-470 for the 300-piece Valentine Program run.

From Spec to heart gift box

The calendar below is what we quote on a 300-piece Valentine Program run of bridal Ring Sets. It starts when the spec is signed, not when the deposit clears, the figure being USD 72-470 for a 300-piece run.

  1. Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
  2. Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
  3. Approve the sample in writing, including the reject rule and the retained reference tray.
  4. Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
  5. Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.

A first order of 50 pieces is a measurement, not a purchase. It tells you what cross-piece color match looks like from this bench, which the Valentine Program file records at USD 72-470 in heart gift box.

A 300-Piece Test Run

At 300 pieces inside heart gift box, the first order reads sell-through without betting the season on one model, and the Valentine Program quote for it sits at USD 72-470.

Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, and at USD 72-470 for 300 pieces that is the number the buyer signs.

The Dock Check on bridal Ring Sets

We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. IGI report travels with the shipping documents, the figure being USD 72-470 for a 300-piece run.

DDP removes the duty invoice that arrives after the carton clears, which matters on a first Valentine Program order at USD 72-470.

Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, the figure being USD 72-470 for a 300-piece run.

Frequently Asked Questions

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is USD 72-470 on the Valentine Program schedule.

What is the minimum order for bridal Ring Sets?

50 pieces per bridal Ring Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, which the Valentine Program file records at USD 72-470 in heart gift box.

Do you supply certificates for bridal Ring Sets?

IGI report on bridal Ring Sets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of cross-piece color match, which is what a counter or a listing actually needs, certified IGI report and packed heart gift box at 300 pieces.

How do you handle a rejected tray?

We replace or credit inside the same order cycle. The retained reference tray decides: if metal lot mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 72-470 for 300 pieces that is the number the buyer signs.

What are the payment terms?

30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is USD 72-470 on the Valentine Program schedule.

Next Step

If you are quoting bridal Ring Sets against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, which is USD 72-470 on the Valentine Program schedule.

The factory behind bridal Ring Sets here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, the figure being USD 72-470 for a 300-piece run.

Related reading: Earrings Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buyers - HOLYCOME Earrings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME

Topics: Bridal Ring Sets Valentine Program

Sourcing lab grown stones at wholesale?

Send us your specifications and target quantity — you will get a costed factory quotation within 12 working hours.

Request a quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Shop the guide

Wholesale items related to this guide

All products

Keep reading

Related buying guides

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Products Search Quote WhatsApp