Earrings
Earrings Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME
Earrings: tolerances, cost structure and the reject rule for US wholesale buyers.
The Sample Approval That Survives Production in the Amazon FBA Ready Program
A US buyer of earrings came to us after 200 earrings from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.
That rejection was avoidable at the drawing stage. Prong geometry belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
We kept the Amazon FBA Ready price and changed the four measurements that matter. The rebuild cost about 22 seconds per piece and removed the whole claim conversation, and at USD 38-210 for 200 pieces that is the number the buyer signs.
Four Spec Lines a Amazon FBA Ready Buyer Checks
The Amazon FBA Ready buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
None of the four adds cost at USD 38-210. They add about 22 seconds per piece and remove the reason to inspect twice.
Cost Split on a Amazon FBA Ready Piece at USD 38-210
At USD 38-210 per piece for earrings, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for earrings | 32% | Alloy choice and casting yield |
| Stone or melee for earrings | 23% | Sieve range and lot batching |
| Setting and finishing labor for earrings | 21% | Jig design and bench minutes |
| Plating, polish and QC for earrings | 14% | Per-tray versus per-piece checks |
| Packaging for earrings | 10% | retail-ready box with FNSKU label |
The saving in the cheapest quote hides in plating and stone grade. At 200 pieces that saving is visible in season two, certified GRA report and packed retail-ready box with FNSKU label at 200 pieces.
Three Failures That Reach the Amazon FBA Ready Bench
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is USD 38-210 on the Amazon FBA Ready schedule.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail-ready box with FNSKU label and certified GRA report.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, the figure being USD 38-210 for a 200-piece run.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is how the Amazon FBA Ready account reads it at USD 38-210.
In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, and the Amazon FBA Ready quote for it sits at USD 38-210.
Listing earrings on Amazon FBA Without a Takedown
Amazon treats jewellery as a category where the packaging is part of the compliance file, not an afterthought. A poly bag with an opening of five inches or more needs the suffocation warning printed on it, and every unit needs an FNSKU label that covers the manufacturer barcode rather than sits beside it, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
For earrings the practical constraint is that a unit must survive a bin with other units and still read clean at unboxing. We pack each piece in a foam-backed pouch, then the retail box, then the FNSKU on the outside of the pouch, so a warehouse scan never touches the box the customer sees, on a 200-piece Amazon FBA Ready order at USD 38-210.
Weight and dimension limits decide your freight per unit more than the piece cost does. A single earring in its retail box normally lands under eight ounces, which keeps it in the small standard tier. Anything above that moves a tier and eats the margin you built into the USD 38-210 quote.
Terms Behind a Amazon FBA Ready Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Amazon FBA Ready order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 38-210 per piece in retail-ready box with FNSKU label.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 38-210 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail-ready box with FNSKU label format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 200-piece Amazon FBA Ready order at USD 38-210.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
The Reject Tray Policy That Decides a Partnership
In US e-commerce, this is the single most negotiated line on earrings and the least documented one, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
At 200 pieces the arithmetic on earrings changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, shipped as retail-ready box with FNSKU label and certified GRA report.
We quote both a first-run price and a reorder price for earrings on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, and the Amazon FBA Ready quote for it sits at USD 38-210.
What the Quote Actually Covers
Nobody quotes it for earrings until something goes wrong, which is exactly why it belongs in the first email, the figure being USD 38-210 for a 200-piece run.
Buyers who get this wrong on earrings usually get it wrong in the first order and correct it in the second. The cost of that correction is rarely the money; it is the four to six weeks of shelf time lost while a replacement run of earrings is scheduled behind other orders, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
Our approach is to write the rule into the earrings spec sheet before casting, then test it on the first tray. A rule that only exists in an email is not a rule, and a rule that is not tested is a hope, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
The Calendar Behind a Amazon FBA Ready Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on earrings at USD 38-210.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, on a 200-piece Amazon FBA Ready order at USD 38-210.
The First Amazon FBA Ready Order
Start with three designs at 50 pieces each. That covers the 200 pieces you need to read sell-through without betting on one model, on a 200-piece Amazon FBA Ready order at USD 38-210.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 200 pieces inside that window. The calendar is the same on every Amazon FBA Ready run, with GRA report and retail-ready box with FNSKU label stated on the same sheet.
Getting retail-ready box with FNSKU label to US e-commerce
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US e-commerce, with GRA report and retail-ready box with FNSKU label stated on the same sheet, shipped as retail-ready box with FNSKU label and certified GRA report.
FOB is the default and DDP is the option. Buyers new to US e-commerce usually take DDP once and then switch after they see the breakdown, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
At receiving, count cartons, weigh one tray and measure ten pieces against stone retention after a 40-cycle wear test. Twenty minutes here saves a season of returns, and the Amazon FBA Ready quote for it sits at USD 38-210.
Frequently Asked Questions
What is the minimum order for earrings?
50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
Do you supply certificates for earrings?
GRA report on earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and at USD 38-210 for 200 pieces that is the number the buyer signs.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Amazon FBA Ready file records at USD 38-210 in retail-ready box with FNSKU label.
What is the minimum order for earrings?
50 pieces per earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 38-210 for the 200-piece Amazon FBA Ready run.
Next Step
If the USD 38-210 band fits the shelf, send a drawing and we quote the 200-piece Amazon FBA Ready run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across earrings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and 200 pieces leaves Wuzhou in retail-ready box with FNSKU label at USD 38-210.
Related reading: Earrings Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME Bracelets Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME
