Emerald Cut Moissanite
Emerald Cut Moissanite Made to Order: Carton Cube, Duty and the Freight Line That Sur - HOLYCOME
Emerald Cut Moissanite: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Made to Order Quote Looks Cheap Until It Lands
In July, a US buyer of emerald Cut Moissanite ordered 50 emerald Cut Moissanite and asked for the same round brilliant and step cuts from 3 mm to 12 mm as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, the figure being USD 35-237 for a 50-piece run.
In the Made to Order file the failure was already written down. Double refraction read sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, on a 50-piece Made to Order order at USD 35-237.
The second run shipped single-piece foam box with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, quoted at USD 35-237 per piece in single-piece foam box.
The Made-to-Order Path for emerald Cut Moissanite
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which is USD 35-237 on the Made to Order schedule.
Twenty days is realistic for a new emerald Cut Moissanite when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is USD 35-237 on the Made to Order schedule.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, with IGI report and single-piece foam box stated on the same sheet.
What Fails First on emerald Cut Moissanite
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, and the Made to Order quote for it sits at USD 35-237.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, on a 50-piece Made to Order order at USD 35-237.
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, on a 50-piece Made to Order order at USD 35-237.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, on a 50-piece Made to Order order at USD 35-237.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with IGI report and single-piece foam box stated on the same sheet.
The Measurements Behind a USD 35-237 Quote
Specification is the only part of a emerald Cut Moissanite quote that survives the season. These four measurements are what we write into the single-piece foam box paperwork, with IGI report and single-piece foam box stated on the same sheet.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Every line above is measurable with a gauge and a scale. At USD 35-237 per piece, a supplier who cannot state them is selling a photo.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 35-237 for the 50-piece Made to Order run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 35-237 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 35-237 for 50 pieces that is the number the buyer signs.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as single-piece foam box and certified IGI report.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Made to Order account reads it at USD 35-237.
What a USD 35-237 Quote Hides
The 50-piece Made to Order price splits as below. The line that decides season two is the plating and QC share, not the metal, the figure being USD 35-237 for a 50-piece run.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for emerald Cut Moissanite | 34% | Alloy choice and casting yield |
| Stone or melee for emerald Cut Moissanite | 25% | Sieve range and lot batching |
| Setting and finishing labor for emerald Cut Moissanite | 22% | Jig design and bench minutes |
| Plating, polish and QC for emerald Cut Moissanite | 15% | Per-tray versus per-piece checks |
| Packaging for emerald Cut Moissanite | 4% | single-piece foam box |
Five lines, one price. If the supplier will not break them out, the number being compared is not a emerald Cut Moissanite price, which is USD 35-237 on the Made to Order schedule.
What a Report Proves and What It Does Not
Buyers in the American bridal market tend to over-index on unit price for emerald Cut Moissanite and under-index on what happens after delivery, the figure being USD 35-237 for a 50-piece run.
Three numbers decide it for emerald Cut Moissanite: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, priced at USD 35-237 for the 50-piece Made to Order run.
We send a one-page sheet with every emerald Cut Moissanite quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, which is how the Made to Order account reads it at USD 35-237.
The Sample Approval That Survives Production
This is where emerald Cut Moissanite stops being a commodity and starts being a supply relationship, the figure being USD 35-237 for a 50-piece run.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on emerald Cut Moissanite and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, the figure being USD 35-237 for a 50-piece run.
We would rather lose a first order of emerald Cut Moissanite on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, which is USD 35-237 on the Made to Order schedule.
A 50-Piece Test Run
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which is how the Made to Order account reads it at USD 35-237.
Put the reject rule in writing before the deposit. The Made to Order conversation after arrival is shorter when the rule is on the order already, with IGI report and single-piece foam box stated on the same sheet.
The Dock Check on emerald Cut Moissanite
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, priced at USD 35-237 for the 50-piece Made to Order run.
DDP suits a first Made to Order order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, shipped as single-piece foam box and certified IGI report.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
From Spec to single-piece foam box
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, on a 50-piece Made to Order order at USD 35-237.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what color consistency within one lot and girdle integrity after setting looks like from this line, with IGI report and single-piece foam box stated on the same sheet, and the Made to Order quote for it sits at USD 35-237.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.
How long does a reorder of the same emerald Cut Moissanite take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white emerald Cut Moissanite, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, shipped as single-piece foam box and certified IGI report.
How is emerald Cut Moissanite packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is USD 35-237 on the Made to Order schedule.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified IGI report and packed single-piece foam box at 50 pieces.
Next Step
Send a photo or a drawing of the piece you want in single-piece foam box, and the reply carries a price, a calendar and the four measurements, which is how the Made to Order account reads it at USD 35-237.
The factory behind emerald Cut Moissanite here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and at USD 35-237 for 50 pieces that is the number the buyer signs.
Related reading: Emerald Cut Moissanite Private Label Carton: Alloy, Karat and the Cost of a Color Cha - HOLYCOME Emerald Cut Moissanite Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME
