Jewelry Tools
Jewelry Tools Distributor Tier: What the Quote Actually Covers - HOLYCOME
Jewelry Tools: tolerances, cost structure and the reject rule for US wholesale buyers.
What the Quote Actually Covers in the Distributor Tier Program
A US buyer of jewelry Tools came to us after 800 jewelry Tools from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: prong geometry had drifted far enough that the buyer's own bench could not correct it without recutting, and the Distributor Tier quote for it sits at USD 36-199.
At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and prong geometry had nowhere to live, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, and the Distributor Tier quote for it sits at USD 36-199.
Cost Split on a Distributor Tier Piece at USD 36-199
At USD 36-199 per piece for jewelry Tools, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for jewelry Tools | 32% | Alloy choice and casting yield |
| Stone or melee for jewelry Tools | 23% | Sieve range and lot batching |
| Setting and finishing labor for jewelry Tools | 21% | Jig design and bench minutes |
| Plating, polish and QC for jewelry Tools | 14% | Per-tray versus per-piece checks |
| Packaging for jewelry Tools | 10% | bulk carton, 50 per bag |
The saving in the cheapest jewelry Tools quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Four Spec Lines a Distributor Tier Buyer Checks
Most quotes describe the jewelry Tool and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, which is how the Distributor Tier account reads it at USD 36-199.
Distributor Pricing Tiers on jewelry Tools
A distributor does not buy a jewelry Tool, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of jewelry Tools move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, which is how the Distributor Tier account reads it at USD 36-199.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, shipped as bulk carton, 50 per bag and certified SGS batch report.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, priced at USD 36-199 for the 800-piece Distributor Tier run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 36-199 on the Distributor Tier schedule.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 36-199 for the 800-piece Distributor Tier run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 800-piece Distributor Tier order at USD 36-199.
Sample to Container: The Real Calendar
In US e-commerce, this is the single most negotiated line on jewelry Tools and the least documented one, which is USD 36-199 on the Distributor Tier schedule.
One practical note on timing for jewelry Tools: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
We date the jewelry Tools proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is USD 36-199 on the Distributor Tier schedule.
AQL, Tray Checks and What a QC Report Should Say
Nobody quotes it for jewelry Tools until something goes wrong, which is exactly why it belongs in the first email, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For jewelry Tools, we publish the figure per SKU and hold it for the order window rather than for the calendar year, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Practically, it shows up in three places for jewelry Tools: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
The Calendar Behind a Distributor Tier Run
For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on jewelry Tools, low enough to test a shelf and high enough to keep the gauge check independent, the figure being USD 36-199 for a 800-piece run.
Getting bulk carton, 50 per bag to US e-commerce
Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, on a 800-piece Distributor Tier order at USD 36-199.
The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, which is USD 36-199 on the Distributor Tier schedule.
The First Distributor Tier Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, on a 800-piece Distributor Tier order at USD 36-199.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white jewelry Tools, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
How is jewelry Tools packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Distributor Tier quote for it sits at USD 36-199.
How long does a reorder of the same jewelry Tool take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 36-199 on the Distributor Tier schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white jewelry Tools, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Next Step
If the USD 36-199 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across jewelry Tools and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Related reading: Jewelry Tools Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME All Products Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
