Lab Grown Diamond Gold
Lab Grown Diamond Gold Distributor Tier: What the Quote Actually Covers - HOLYCOME
Lab Grown Diamond Gold: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Distributor Tier Quote Looks Cheap Until It Lands
Two buyers ordered the same lab Grown Diamond Gold in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was certificate mismatch, and it was measurable on both benches, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Nothing in that rejection was exotic. At USD 114-931 per piece and 800 pieces on the order, a certificate mismatch rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 26 seconds per piece. On 800 pieces that is a few hours at the bench and the whole claim file disappears, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What a USD 114-931 Quote Hides
The cost of a lab Grown Diamond Gold in the USD 114-931 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for lab Grown Diamond Gold | 34% | Alloy choice and casting yield |
| Stone or melee for lab Grown Diamond Gold | 25% | Sieve range and lot batching |
| Setting and finishing labor for lab Grown Diamond Gold | 22% | Jig design and bench minutes |
| Plating, polish and QC for lab Grown Diamond Gold | 15% | Per-tray versus per-piece checks |
| Packaging for lab Grown Diamond Gold | 4% | bulk carton, 50 per bag |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, which is USD 114-931 on the Distributor Tier schedule.
The Measurements Behind a USD 114-931 Quote
Four numbers separate a 800-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, shipped as bulk carton, 50 per bag and certified SGS batch report, which is how the Distributor Tier account reads it at USD 114-931.
Distributor Pricing Tiers on lab Grown Diamond Gold
A distributor does not buy a lab Grown Diamond Gold, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, and at USD 114-931 for 800 pieces that is the number the buyer signs.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, and at USD 114-931 for 800 pieces that is the number the buyer signs.
Turn is the number the distributor manages. At USD 114-931 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of lab Grown Diamond Gold move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on lab Grown Diamond Gold
certificate mismatch
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, on a 800-piece Distributor Tier order at USD 114-931.
growth-method disclosure
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, which is USD 114-931 on the Distributor Tier schedule.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, which is USD 114-931 on the Distributor Tier schedule.
table percentage variance
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, and the Distributor Tier quote for it sits at USD 114-931.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Distributor Tier quote for it sits at USD 114-931.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 114-931 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Distributor Tier quote for it sits at USD 114-931.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is how the Distributor Tier account reads it at USD 114-931.
Sample to Container: The Real Calendar
On lab Grown Diamond Gold, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, priced at USD 114-931 for the 800-piece Distributor Tier run.
One practical note on timing for lab Grown Diamond Gold: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
We date the lab Grown Diamond Gold proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
AQL, Tray Checks and What a QC Report Should Say
Buyers in US wholesale tend to over-index on unit price for lab Grown Diamond Gold and under-index on what happens after delivery, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For lab Grown Diamond Gold, we publish the figure per SKU and hold it for the order window rather than for the calendar year, on a 800-piece Distributor Tier order at USD 114-931.
Practically, it shows up in three places for lab Grown Diamond Gold: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and at USD 114-931 for 800 pieces that is the number the buyer signs.
From Spec to bulk carton, 50 per bag
The calendar below is what we quote on a 800-piece Distributor Tier run of lab Grown Diamond Gold. It starts when the spec is signed, not when the deposit clears, shipped as bulk carton, 50 per bag and certified SGS batch report.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order of 50 pieces is a measurement, not a purchase. It tells you what report plot match looks like from this bench, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The Dock Check on lab Grown Diamond Gold
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. SGS batch report travels with the shipping documents, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Distributor Tier order at USD 114-931.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
A 800-Piece Test Run
At 800 pieces inside bulk carton, 50 per bag, the first order reads sell-through without betting the season on one model, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Gold, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and the Distributor Tier quote for it sits at USD 114-931.
How is lab Grown Diamond Gold packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and the Distributor Tier quote for it sits at USD 114-931.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
How long does a reorder of the same lab Grown Diamond Gold take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Gold, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and the Distributor Tier quote for it sits at USD 114-931.
Next Step
If you are quoting lab Grown Diamond Gold against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
The factory behind lab Grown Diamond Gold here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Related reading: Lab Grown Diamond Gold Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Lab Grown Diamond Necklaces Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
