Lab Grown Diamond Jewelry
Lab Grown Diamond Jewelry Distributor Tier: What the Quote Actually Covers - HOLYCOME
Lab Grown Diamond Jewelry: tolerances, cost structure and the reject rule for US wholesale buyers.
What the Quote Actually Covers in the Distributor Tier Program
A US buyer of lab Grown Diamond Jewelry sent us a competitor's lab Grown Diamond Jewelry in June with one question: why does this fail at certificate mismatch after a season. We measured it, rebuilt the spec around report plot match and table percentage within the stated band, and shipped 800 lab Grown Diamond Jewelry that cleared inspection with zero rejects, and the Distributor Tier quote for it sits at USD 114-931.
At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and certificate mismatch had nowhere to live, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, shipped as bulk carton, 50 per bag and certified SGS batch report, and the Distributor Tier quote for it sits at USD 114-931.
Cost Split on a Distributor Tier Piece at USD 114-931
At USD 114-931 per piece for lab Grown Diamond Jewelry, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for lab Grown Diamond Jewelry | 32% | Alloy choice and casting yield |
| Stone or melee for lab Grown Diamond Jewelry | 23% | Sieve range and lot batching |
| Setting and finishing labor for lab Grown Diamond Jewelry | 21% | Jig design and bench minutes |
| Plating, polish and QC for lab Grown Diamond Jewelry | 14% | Per-tray versus per-piece checks |
| Packaging for lab Grown Diamond Jewelry | 10% | bulk carton, 50 per bag |
The saving in the cheapest lab Grown Diamond Jewelry quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, shipped as bulk carton, 50 per bag and certified SGS batch report.
Four Spec Lines a Distributor Tier Buyer Checks
Most quotes describe the lab Grown Diamond Jewelry and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and at USD 114-931 for 800 pieces that is the number the buyer signs.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, which is USD 114-931 on the Distributor Tier schedule.
Distributor Pricing Tiers on lab Grown Diamond Jewelry
A distributor does not buy a lab Grown Diamond Jewelry, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, on a 800-piece Distributor Tier order at USD 114-931.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 114-931.
Turn is the number the distributor manages. At USD 114-931 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of lab Grown Diamond Jewelry move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
certificate mismatch
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Distributor Tier account reads it at USD 114-931.
growth-method disclosure
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 114-931 for the 800-piece Distributor Tier run.
table percentage variance
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, which is how the Distributor Tier account reads it at USD 114-931.
In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 114-931 for a 800-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 114-931 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 114-931.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Sample to Container: The Real Calendar
This is the question that separates a trading company from a factory, and on lab Grown Diamond Jewelry the answer is usually shorter than buyers expect, and at USD 114-931 for 800 pieces that is the number the buyer signs.
One practical note on timing for lab Grown Diamond Jewelry: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
We date the lab Grown Diamond Jewelry proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is how the Distributor Tier account reads it at USD 114-931.
AQL, Tray Checks and What a QC Report Should Say
Buyers ask it in the first call about lab Grown Diamond Jewelry and rarely get a number they can put in a spreadsheet, and the Distributor Tier quote for it sits at USD 114-931.
In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For lab Grown Diamond Jewelry, we publish the figure per SKU and hold it for the order window rather than for the calendar year, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Practically, it shows up in three places for lab Grown Diamond Jewelry: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, the figure being USD 114-931 for a 800-piece run.
The Calendar Behind a Distributor Tier Run
For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on lab Grown Diamond Jewelry, low enough to test a shelf and high enough to keep the gauge check independent, and the Distributor Tier quote for it sits at USD 114-931.
Getting bulk carton, 50 per bag to North American retail
Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against report plot match and table percentage within the stated band, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
The First Distributor Tier Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, which is how the Distributor Tier account reads it at USD 114-931.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Jewelry, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
How is lab Grown Diamond Jewelry packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 114-931.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.
How long does a reorder of the same lab Grown Diamond Jewelry take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Jewelry, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Next Step
If the USD 114-931 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across lab Grown Diamond Jewelry and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, shipped as bulk carton, 50 per bag and certified SGS batch report.
Related reading: Lab Grown Diamond Jewelry Trade Show Sample: MOQ, Mixed Designs and the Real First Or - HOLYCOME Lab Grown Emerald Jewelry Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
