Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

Lab Grown Diamond Necklaces

Lab Grown Diamond Necklaces AQL, Defect Classes and the Reject Rul for Amazon Sellers - HOLYCOME

HOLYCOME · November 12, 2026 · 8 min read

Returns on Lab Grown Diamond Necklaces are not a failure of trust. They are a process: a sampling plan, a defect class, a credit or remake rule, and a photo fil

Lab Grown Diamond Necklaces AQL, Defect Classes and the Reject Rul for Amazon Sellers - HOLYCOME

Returns on Lab Grown Diamond Necklaces are not a failure of trust. They are a process: a sampling plan, a defect class, a credit or remake rule, and a photo file. The buyers who lose the most money on Lab Grown Diamond Necklaces are the ones who inspect nothing until the tray lands on their own desk.

When a Lab Grown Diamond Necklaces order is wrong

Most Lab Grown Diamond Necklaces disputes are not malice. They are a missing step: no approved first article, no final inspection photos, no sampling plan. A tray of Lab Grown Diamond Necklaces pieces arriving with bent prongs, mismatched stones or bad plating is traceable to one of those skipped steps.

Lab Grown Diamond Necklaces wholesale workshop at HOLYCOME

The fix is not to argue after delivery on a Lab Grown Diamond Necklaces order. It is to put the sampling plan and the first-article approval in the order, so the defect stops at the bench, not at your warehouse.

Most Lab Grown Diamond Necklaces disputes happen because the sample and the bulk differ. The sample is hand-finished; bulk runs on the bench. Approve the pre-production sample, not just the showroom sample, and photograph it beside the bulk piece.

The AQL sampling plan for Lab Grown Diamond Necklaces

Use two levels on a Lab Grown Diamond Necklaces lot. Critical defects — sharp prongs, loose stones, broken solder, wrong karat — sample to AQL 1.0. Finish defects — scratches, plating haze, off-shade stone — sample to AQL 2.5.

For a 500-piece Lab Grown Diamond Necklaces lot, inspect 32 pieces. Up to 2 critical defects accepts the lot; 3 or more rejects it and the bench re-runs. Write this into the Lab Grown Diamond Necklaces order so the rule is decided before the pieces ship.

Critical defects on Lab Grown Diamond Necklaces are not negotiable: a sharp prong scratches the customer, a loose stone falls off, a broken clasp makes the piece unwearable. These accept zero defects in most channels.

Defect classes for Lab Grown Diamond Necklaces

Define the Lab Grown Diamond Necklaces classes in writing. Class A: piece cannot be sold (stone loose, prong sharp, broken clasp). Class B: piece is sellable after touch-up (light scratch, uneven polish). Class C: piece passes but should not repeat (minor plating unevenness).

Each class has a different action. Class A is remake or credit on the spot. Class B is touch-up before pack. Class C is logged for the next Lab Grown Diamond Necklaces run. Without written classes, every defect becomes a negotiation.

Finish defects on Lab Grown Diamond Necklaces are where AQL helps. A light scratch on the back of a ring is acceptable; a scratch on the face is not. Write the defect location into the acceptance rule, not just the count.

Red flags in Lab Grown Diamond Necklaces returns

Three red flags on Lab Grown Diamond Necklaces claims. First, a supplier who refuses to inspect before shipment. Second, a no-claims-after-delivery clause in the order. Third, a dispute settled by a partial credit without a photo file.

Hold the photo file. Every Lab Grown Diamond Necklaces claim needs the PO, the approved first article, the batch number and the piece photo. Without it, the claim becomes a he-said-she-said with the freight.

The photo file is your claim. For every Lab Grown Diamond Necklaces lot, keep the PO, the approved sample, the batch number, and photos of the first article, the bench and the final pack. A claim without this file is a negotiation, not a right.

The cost of a claim on Lab Grown Diamond Necklaces

Numbers. A 500-piece Lab Grown Diamond Necklaces lot with a 3 percent defect rate is 15 pieces. Re-making 15 pieces costs the factory roughly the labour of one run and stops the claim from reaching you.

A buyer who skips sampling on a Lab Grown Diamond Necklaces lot and finds 15 percent defects at stocking loses two weeks of shelf time and the reorder window. The inspection step costs one working day; the failed Lab Grown Diamond Necklaces lot costs a season.

When a claim lands, fix the root cause, not just the piece. A Lab Grown Diamond Necklaces lot with three loose stones means the setting station pressure is wrong, not that three pieces were unlucky. Adjust the station before the next run.

Scaling returns from 50 to 500 Lab Grown Diamond Necklaces pieces

At 50 Lab Grown Diamond Necklaces pieces, a bad lot is annoying. At 500, a 3 percent defect rate is 15 pieces and a warehouse dispute. The sampling plan pays for itself the first time it catches a loose-stone batch before the container closes.

Repeat Lab Grown Diamond Necklaces buyers run the same AQL every lot and keep the photo file. They rarely have a claim; the factory knows the rule in writing and the bench adjusts before packing.

Picture a 500-piece Lab Grown Diamond Necklaces lot sampled at 32 pieces. Two loose stones in the sample means the whole lot goes back to the bench before shipping. The cost is three working days; the alternative is a warehouse that finds fifteen loose stones and a retail buyer who never orders again. The AQL step is unglamorous, but on Lab Grown Diamond Necklaces it is the single cheapest insurance you have.

Your Lab Grown Diamond Necklaces checklist

  1. Approve the first Lab Grown Diamond Necklaces article in writing before bulk.
  2. Set AQL 1.0 for critical defects and 2.5 for finish defects.
  3. Inspect 32 pieces on a 500-piece Lab Grown Diamond Necklaces lot.
  4. Define Class A, B and C defects in the PO.
  5. Hold the balance until final photos match the approved sample.
  6. Keep the photo file: PO, batch number, piece photo.
  7. Log Class C findings so the next Lab Grown Diamond Necklaces run does not repeat them.
Lab Grown Diamond Necklaces quality control at HOLYCOME

Frequently Asked Questions

What is the reject rule for a Lab Grown Diamond Necklaces bulk order?

Sample the final Lab Grown Diamond Necklaces lot under AQL 1.0 for critical defects (sharp prongs, loose stones, broken solder) and 2.5 for finish defects. A sample size of 32 pieces at a 500-piece lot is the common starting point. The sampling plan and defect classes are written into every Lab Grown Diamond Necklaces PO.

Who pays for defective Lab Grown Diamond Necklaces pieces?

The factory, if the defect is a workmanship deviation from the approved sample. Send photos, the PO number and the approved sample reference. We credit the next Lab Grown Diamond Necklaces order or re-make the shortfall; we do not charge the buyer for our bench error. The sampling plan and defect classes are written into every Lab Grown Diamond Necklaces PO.

How do I prevent a Lab Grown Diamond Necklaces claim before it ships?

Approve the first article in writing, ask for pre-production photos, and hold the balance until final inspection photos match the approved sample. Most Lab Grown Diamond Necklaces disputes come from skipping the first-article step, not from the bench. The sampling plan and defect classes are written into every Lab Grown Diamond Necklaces PO.

Can I return stock that simply does not sell?

No. Lab Grown Diamond Necklaces made to your design, size and metal is not returnable. What we can do is re-design the piece, exchange the stock for a new design, or split the run into a smaller first batch. Order 50 Lab Grown Diamond Necklaces pieces, prove the sell-through, then scale. The sampling plan and defect classes are written into every Lab Grown Diamond Necklaces PO.

What if a stone falls out after six months at retail?

Send the piece back with the wearer story. On a Lab Grown Diamond Necklaces piece set by our bench, prong failure within the warranty window is a remake or credit. We ask for the retail photos so we can also improve the setting station before the next Lab Grown Diamond Necklaces run. The sampling plan and defect classes are written into every Lab Grown Diamond Necklaces PO.

Returns on Lab Grown Diamond Necklaces are a process, not a dispute. The sampling plan, the defect classes and the photo file turn a bad lot into a credit or a remake, and stop it from reaching your retail customer.

Related Reading

Next Step

Send us the approved Lab Grown Diamond Necklaces sample, and we write the AQL sampling plan, the defect classes and the credit rule into the order. Inspection photos land on your desk before the balance is released.

HOLYCOME inspects every Lab Grown Diamond Necklaces lot under AQL before it ships, and keeps the first article, the batch number and the inspection photos for six months. A defect from our bench is remade or credited, not argued. We have run this since 2009 in Wuzhou. Trade desk: service@holycome.com, WhatsApp +86 18078079070.

Every Lab Grown Diamond Necklaces lot HOLYCOME ships is sampled under AQL before it leaves Wuzhou, and the photo file travels with the carton. Since 2009 we have treated a claim as a bench fix, not a dispute: remakes are credited on the next Lab Grown Diamond Necklaces order, and the setting station is adjusted before re-run.

A Lab Grown Diamond Necklaces lot is controlled before it ships, not after. Approve the first article, sample to AQL 1.0 for critical defects, define Class A B and C in the PO, and hold the balance on inspection photos. The photo file turns a Lab Grown Diamond Necklaces claim from a dispute into a credit.

Send us the approved Lab Grown Diamond Necklaces sample. We write the AQL sampling plan, the defect classes and the credit rule into the PO, and send inspection photos before the balance is released.

Topics: Lab Grown Diamond Necklaces

Sourcing lab grown stones at wholesale?

Send us your specifications and target quantity — you will get a costed factory quotation within 12 working hours.

Request a quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Shop the guide

Wholesale items related to this guide

All products

Keep reading

Related buying guides

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Products Search Quote WhatsApp