Lab Grown Diamond Supplier
Lab Grown Diamond Supplier Distributor Tier: What the Quote Actually Covers - HOLYCOME
Lab Grown Diamond Supplier: tolerances, cost structure and the reject rule for US wholesale buyers.
What the Quote Actually Covers in the Distributor Tier Program
A US buyer of lab Grown Diamond Supplier sent us a competitor's lab Grown Diamond Supplier in November with one question: why does this fail at certificate mismatch after a season. We measured it, rebuilt the spec around report plot match and table percentage within the stated band, and shipped 800 lab Grown Diamond Supplier that cleared inspection with zero rejects, and at USD 114-931 for 800 pieces that is the number the buyer signs.
The bench did not miss the defect, it was never asked to look for it. Certificate mismatch was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, and the Distributor Tier quote for it sits at USD 114-931.
The rebuild held the USD 114-931 quote and changed the plating log, the gauge and the tray rule. Second run shipped bulk carton, 50 per bag with zero rejects.
Cost Split on a Distributor Tier Piece at USD 114-931
Buyers assume the stone dominates the cost of a lab Grown Diamond Supplier. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for lab Grown Diamond Supplier | 32% | Alloy choice and casting yield |
| Stone or melee for lab Grown Diamond Supplier | 23% | Sieve range and lot batching |
| Setting and finishing labor for lab Grown Diamond Supplier | 21% | Jig design and bench minutes |
| Plating, polish and QC for lab Grown Diamond Supplier | 14% | Per-tray versus per-piece checks |
| Packaging for lab Grown Diamond Supplier | 10% | bulk carton, 50 per bag |
The cheapest quote for lab Grown Diamond Supplier usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, the figure being USD 114-931 for a 800-piece run.
Four Spec Lines a Distributor Tier Buyer Checks
A Distributor Tier quote that states only metal and stone size leaves certificate mismatch undefined, and undefined is what gets rejected on arrival, the figure being USD 114-931 for a 800-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Nothing here adds cost at USD 114-931. It adds documentation, and documentation is what the bulk carton, 50 per bag carton is missing.
Distributor Pricing Tiers on lab Grown Diamond Supplier
A distributor does not buy a lab Grown Diamond Supplier, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Turn is the number the distributor manages. At USD 114-931 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of lab Grown Diamond Supplier move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
certificate mismatch
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, priced at USD 114-931 for the 800-piece Distributor Tier run.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 114-931 on the Distributor Tier schedule.
growth-method disclosure
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 114-931 for a 800-piece run.
table percentage variance
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, which is USD 114-931 on the Distributor Tier schedule.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and the Distributor Tier quote for it sits at USD 114-931.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 114-931 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 800-piece Distributor Tier order at USD 114-931.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 114-931 on the Distributor Tier schedule.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Sample to Container: The Real Calendar
The figure below is what we quote for lab Grown Diamond Supplier, and it is deliberately narrower than the market average, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
One practical note on timing for lab Grown Diamond Supplier: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, the figure being USD 114-931 for a 800-piece run.
We date the lab Grown Diamond Supplier proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
AQL, Tray Checks and What a QC Report Should Say
Most lab Grown Diamond Supplier disputes we arbitrate trace back to this line, not to the defect itself, the figure being USD 114-931 for a 800-piece run.
In the US market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For lab Grown Diamond Supplier, we publish the figure per SKU and hold it for the order window rather than for the calendar year, and the Distributor Tier quote for it sits at USD 114-931.
Practically, it shows up in three places for lab Grown Diamond Supplier: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is how the Distributor Tier account reads it at USD 114-931.
The Calendar Behind a Distributor Tier Run
The calendar below is what we quote on a 800-piece run of lab Grown Diamond Supplier. It starts when the spec is signed, not when the deposit clears, which is USD 114-931 on the Distributor Tier schedule.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on the Distributor Tier program, low enough to test a category and high enough to keep the casting line accountable, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
Getting bulk carton, 50 per bag to the US market
For a Distributor Tier order at 800 pieces the carton count decides the freight more than the weight does. bulk carton, 50 per bag packs tighter than a display tray, and at USD 114-931 for 800 pieces that is the number the buyer signs.
The freight rate matters less than the clearance terms at USD 114-931 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of bulk carton, 50 per bag and measure ten pieces against report plot match. Twenty minutes here saves a season, which is USD 114-931 on the Distributor Tier schedule.
The First Distributor Tier Order
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, shipped as bulk carton, 50 per bag and certified SGS batch report.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 800 pieces the calendar is the same on every Distributor Tier run, which is how the Distributor Tier account reads it at USD 114-931.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Supplier, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 114-931 for a 800-piece run.
How is lab Grown Diamond Supplier packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is USD 114-931 on the Distributor Tier schedule.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
How long does a reorder of the same lab Grown Diamond Supplier take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 800-piece Distributor Tier order at USD 114-931.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white lab Grown Diamond Supplier, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 114-931 for a 800-piece run.
Next Step
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, and the Distributor Tier quote for it sits at USD 114-931.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across lab Grown Diamond Supplier and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
Related reading: Lab Grown Diamond Supplier Trade Show Sample: MOQ, Mixed Designs and the Real First O - HOLYCOME Custom Jewelry Manufacturer Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
