Loose Lab Grown Diamonds Wholesale
Loose Lab Grown Diamonds Wholesale Distributor Tier: What the Quote Actually Covers - HOLYCOME
Loose Lab Grown Diamonds Wholesale: tolerances, cost structure and the reject rule for US wholesale buyers.
What the Quote Actually Covers in the Distributor Tier Program
A US buyer of loose Lab Grown Diamonds Wholesale sent us a competitor's loose Lab Grown Diamonds Wholesale in November with one question: why does this fail at sieve drift after a season. We measured it, rebuilt the spec around size distribution within the declared sieve and zero girdle chips on arrival, and shipped 800 loose Lab Grown Diamonds Wholesale that cleared inspection with zero rejects, priced at USD 2-90 for the 800-piece Distributor Tier run.
At 800 pieces the buyer was not buying a defect, they were buying a document. The Distributor Tier order carried a photo and a price, and sieve drift had nowhere to live, on a 800-piece Distributor Tier order at USD 2-90.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, which is USD 2-90 on the Distributor Tier schedule.
Cost Split on a Distributor Tier Piece at USD 2-90
At USD 2-90 per piece for loose Lab Grown Diamonds Wholesale, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for loose Lab Grown Diamonds Wholesale | 32% | Alloy choice and casting yield |
| Stone or melee for loose Lab Grown Diamonds Wholesale | 23% | Sieve range and lot batching |
| Setting and finishing labor for loose Lab Grown Diamonds Wholesale | 21% | Jig design and bench minutes |
| Plating, polish and QC for loose Lab Grown Diamonds Wholesale | 14% | Per-tray versus per-piece checks |
| Packaging for loose Lab Grown Diamonds Wholesale | 10% | bulk carton, 50 per bag |
The saving in the cheapest loose Lab Grown Diamonds Wholesale quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, and the Distributor Tier quote for it sits at USD 2-90.
Four Spec Lines a Distributor Tier Buyer Checks
Most quotes describe the loose Lab Grown Diamonds Wholesale and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, on a 800-piece Distributor Tier order at USD 2-90.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Distributor Pricing Tiers on loose Lab Grown Diamonds Wholesale
A distributor does not buy a loose Lab Grown Diamonds Wholesale, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, shipped as bulk carton, 50 per bag and certified SGS batch report.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, priced at USD 2-90 for the 800-piece Distributor Tier run.
Turn is the number the distributor manages. At USD 2-90 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of loose Lab Grown Diamonds Wholesale move in 800-piece lots rather than in the 50-piece sample quantity.
Three Failures That Reach the Distributor Tier Bench
sieve drift
A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, which is how the Distributor Tier account reads it at USD 2-90.
The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
mixed color lots
Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, which is USD 2-90 on the Distributor Tier schedule.
girdle damage
Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In a 800-piece run this typically shows on 8 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, which is USD 2-90 on the Distributor Tier schedule.
Terms Behind a Distributor Tier Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 2-90 for 800 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 2-90 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 2-90.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 2-90 for a 800-piece run.
Sample to Container: The Real Calendar
Ask three suppliers of loose Lab Grown Diamonds Wholesale this question and you will get three answers. Only one of them survives an inspection, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
One practical note on timing for loose Lab Grown Diamonds Wholesale: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, priced at USD 2-90 for the 800-piece Distributor Tier run.
We date the loose Lab Grown Diamonds Wholesale proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
AQL, Tray Checks and What a QC Report Should Say
On loose Lab Grown Diamonds Wholesale, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, which the Distributor Tier file records at USD 2-90 in bulk carton, 50 per bag.
In North American retail terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For loose Lab Grown Diamonds Wholesale, we publish the figure per SKU and hold it for the order window rather than for the calendar year, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
Practically, it shows up in three places for loose Lab Grown Diamonds Wholesale: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, and at USD 2-90 for 800 pieces that is the number the buyer signs.
The Calendar Behind a Distributor Tier Run
For bulk carton, 50 per bag at 800 pieces, the sequence is fixed and the dates are the only thing that moves, shipped as bulk carton, 50 per bag and certified SGS batch report.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
MOQ stays at 50 pieces per design on loose Lab Grown Diamonds Wholesale, low enough to test a shelf and high enough to keep the gauge check independent, which is how the Distributor Tier account reads it at USD 2-90.
Getting bulk carton, 50 per bag to North American retail
Export runs through Guangzhou or Shenzhen. For Distributor Tier orders the SGS batch report file travels with the shipping documents, not separately, the figure being USD 2-90 for a 800-piece run.
The clearance term matters more than the rate at 800 pieces. A duty surprise can cost more than the whole freight line, shipped as bulk carton, 50 per bag and certified SGS batch report.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against size distribution within the declared sieve and zero girdle chips on arrival, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, and the Distributor Tier quote for it sits at USD 2-90.
The First Distributor Tier Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, the figure being USD 2-90 for a 800-piece run.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, shipped as bulk carton, 50 per bag and certified SGS batch report, shipped as bulk carton, 50 per bag and certified SGS batch report.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white loose Lab Grown Diamonds Wholesale, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
How is loose Lab Grown Diamonds Wholesale packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 2-90 per piece in bulk carton, 50 per bag.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 2-90 on the Distributor Tier schedule.
How long does a reorder of the same loose Lab Grown Diamonds Wholesale take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white loose Lab Grown Diamonds Wholesale, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 2-90.
Next Step
If the USD 2-90 band fits your shelf, send the drawing and we will quote the 800-piece Distributor Tier run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across loose Lab Grown Diamonds Wholesale and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, shipped as bulk carton, 50 per bag and certified SGS batch report.
Related reading: Loose Lab Grown Diamonds Wholesale Trade Show Sample: MOQ, Mixed Designs and the Real - HOLYCOME Moissanite Supplier & Manufacturer Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
