Loose Moissanite Stones
Loose Moissanite Stones Made to Order: Carton Cube, Duty and the Freight Line That Su - HOLYCOME
Loose Moissanite Stones: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Made to Order Quote Looks Cheap Until It Lands
Two buyers ordered the same loose Moissanite Stone in the same month. One paid 9% less and absorbed 23 rejects out of 50 pieces; the other paid our quote and shipped clean. The difference was sieve drift, and it was measurable on both benches, with IGI report and single-piece foam box stated on the same sheet.
The defect did not surprise us. Sieve drift is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming loose Moissanite Stone, and the Made to Order quote for it sits at USD 3-118.
We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on size distribution within the declared sieve and zero girdle chips on arrival, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.
The Made-to-Order Path for loose Moissanite Stones
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, certified IGI report and packed single-piece foam box at 50 pieces.
Twenty days is realistic for a new loose Moissanite Stone when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is USD 3-118 on the Made to Order schedule.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, shipped as single-piece foam box and certified IGI report.
What Fails First on loose Moissanite Stones
mixed color lots
Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, and at USD 3-118 for 50 pieces that is the number the buyer signs.
Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.
girdle damage
Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, which the Made to Order file records at USD 3-118 in single-piece foam box.
In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, which is how the Made to Order account reads it at USD 3-118.
sieve drift
A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, shipped as single-piece foam box and certified IGI report.
The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and at USD 3-118 for 50 pieces that is the number the buyer signs.
The Measurements Behind a USD 3-118 Quote
Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on loose Moissanite Stones, and three of them cost nothing to specify, which is how the Made to Order account reads it at USD 3-118.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Each line is a gauge, not a slogan. A supplier who cannot quote a number for sieve drift is quoting an opinion about loose Moissanite Stones, which the Made to Order file records at USD 3-118 in single-piece foam box.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 3-118 for 50 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-118 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 3-118 per piece in single-piece foam box.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified IGI report and packed single-piece foam box at 50 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with IGI report and single-piece foam box stated on the same sheet.
What a USD 3-118 Quote Hides
The Made to Order price of 50 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, with IGI report and single-piece foam box stated on the same sheet.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for loose Moissanite Stones | 34% | Alloy choice and casting yield |
| Stone or melee for loose Moissanite Stones | 25% | Sieve range and lot batching |
| Setting and finishing labor for loose Moissanite Stones | 22% | Jig design and bench minutes |
| Plating, polish and QC for loose Moissanite Stones | 15% | Per-tray versus per-piece checks |
| Packaging for loose Moissanite Stones | 4% | single-piece foam box |
Break the USD 3-118 quote into these five lines and the comparison stops being rhetorical.
What a Report Proves and What It Does Not
In US e-commerce, this is the single most negotiated line on loose Moissanite Stones and the least documented one, which is how the Made to Order account reads it at USD 3-118.
Three numbers decide it for loose Moissanite Stones: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and at USD 3-118 for 50 pieces that is the number the buyer signs.
We send a one-page sheet with every loose Moissanite Stones quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, shipped as single-piece foam box and certified IGI report.
The Sample Approval That Survives Production
Nobody quotes it for loose Moissanite Stones until something goes wrong, which is exactly why it belongs in the first email, priced at USD 3-118 for the 50-piece Made to Order run.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on loose Moissanite Stones and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, priced at USD 3-118 for the 50-piece Made to Order run.
We would rather lose a first order of loose Moissanite Stones on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and at USD 3-118 for 50 pieces that is the number the buyer signs.
A 50-Piece Test Run
A test run at 50 pieces tells you three things: whether sieve drift is controlled, whether packing survives freight, and whether the count is honest, with IGI report and single-piece foam box stated on the same sheet, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.
Put the reject rule in writing before the deposit. The Made to Order conversation after arrival is shorter when the rule is already on the order, certified IGI report and packed single-piece foam box at 50 pieces.
The Dock Check on loose Moissanite Stones
Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 3-118 per piece the choice is a cash-flow decision.
DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, which is USD 3-118 on the Made to Order schedule.
On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, on a 50-piece Made to Order order at USD 3-118.
From Spec to single-piece foam box
On 50 pieces of loose Moissanite Stones the calendar starts at the signed spec, not at the deposit, and it ends with single-piece foam box on a pallet, priced at USD 3-118 for the 50-piece Made to Order run.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A 50-piece first order at USD 3-118 is a measurement of size distribution within the declared sieve, not a commitment to the range.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.
How long does a reorder of the same loose Moissanite Stone take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, on a 50-piece Made to Order order at USD 3-118.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white loose Moissanite Stones, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 50-piece Made to Order order at USD 3-118.
How is loose Moissanite Stones packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, certified IGI report and packed single-piece foam box at 50 pieces.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.
Next Step
Send a photo or a drawing of the piece you want in single-piece foam box. We answer with a price, a calendar and the four measurements above, the figure being USD 3-118 for a 50-piece run.
The factory behind loose Moissanite Stones here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, priced at USD 3-118 for the 50-piece Made to Order run.
Related reading: Loose Moissanite Stones Private Label Carton: Alloy, Karat and the Cost of a Color Ch - HOLYCOME Loose Moissanite Stones Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME
