Loose Moissanite Stones
Loose Moissanite Stones Manufacturer Pricing: 5 Cost Lines Behind the Quote - HOLYCOME
Loose Moissanite Stones: tolerances, cost structure and the reject rule for US wholesale buyers.
Answer First, Arithmetic After
The honest answer is that a loose moissanite stones quote is five costs wearing one number. Metal, stone, bench labor, finishing and packing each move for a different reason, and a supplier that will not separate them is asking you to compare a total against a total with no scope attached.
Where the USD 3-95 Band Goes
Use this to audit any quote. If the stone share is far below the row below, the grade moved. If the labor share is far below, the finishing moved to a per-tray check, and that is where the rejects come from, and at USD 3-95 for loose moissanite stones it is the one line that cannot be recovered later.
| Cost line | Share of piece | What moves it | Who controls it |
|---|---|---|---|
| Metal for the loose moissanite stone | 34% | Alloy choice, shank thickness and casting yield | Factory |
| Stone and melee in loose moissanite stones | 20% | Sieve range, grade band and lot batching | Market plus grade |
| Bench labor per piece | 21% | Setting type, prong count and jig design | Factory |
| Finishing and plating | 15% | Plating micron, polish passes and pre-plate inspection | Factory |
| Packing and the velvet pouch and mailer | 10% | Pouch, box, print run and carton count | Buyer choice |
A quote with no split is a quote with no scope. Ask for the five lines and the answer will usually tell you which line the supplier was protecting, and loose moissanite stones at USD 3-95 is where this shows up first.
Line by Line
Where the metal line sits
Metal is the least negotiable line in a loose moissanite stones quote, because it is bought by weight and priced by weight. What a factory controls is thickness and yield: a shank 0.2 mm thinner saves a few percent of metal and costs a resizing later, and a casting yield two points better saves more than any discount conversation. Ask for the gram weight per piece at the quoted size, not for a percentage off.
Where the stone line sits
The stone line is where two quotes for the same drawing diverge by double digits, and almost never because one factory is cheaper. It diverges because one is quoting a grade band and the other is quoting a grade. Ask for the band in writing: colour range, clarity range, mm tolerance. A loose moissanite stone at USD 3-95 with a wide band and one at the same price with a narrow band are not the same product.
Where the labor line sits
Bench minutes decide the labor share, and the setting type decides the minutes. A prong setting and a bezel on the same loose moissanite stone can differ by several minutes per piece, which at 300 pieces is the difference between one quote and another. Ask for minutes per piece and for the jig that holds the repeat, because a jig is what makes a reorder cost less than the first run.
Where the finishing line sits
Finishing is the cheapest line to specify and the most expensive to skip. Rhodium at 0.20 micron with a palladium strike reads white through a season; nominal plating reads white at the counter and yellow at the third month. Pre-plate inspection of casting porosity belongs here too, because plating a porous surface is a six-week delay on a complaint rather than a fix, which is what loose moissanite stones at USD 3-95 actually buys.
Where the packing and freight line sits
Packing is a buyer choice, so it should be quoted separately from the piece. The velvet pouch and mailer carries a print run, a carton count and a packing list, and all three are priced per order rather than per piece. Freight is the one line that is not a cost of the loose moissanite stone at all, which is why landed cost belongs on a second sheet.
What Changes Between Bands
| Quantity band | Unit price | What changes |
|---|---|---|
| 50 to 200 pieces | USD 3-95 | Setup amortised over a small run; gauge and sample already paid |
| 200 to 500 pieces | USD 2-87 | Jig and fixture amortised; stone bought in a matched lot |
| 500 pieces and above | USD 2-80 | Dedicated stone procurement and a reserved production slot |
The ladder is arithmetic, not a volume trick. The setup, the gauge and the sample are fixed costs; the metal and stone are not. Splitting them explains why the third band moves less than the second, which is what loose moissanite stones at USD 3-95 actually buys.
A buyer comparing a 50-piece quote with a 500-piece quote is comparing two different products. Compare bands, then decide which band your first two orders actually sit in, because that is the number your margin has to survive, which is where most loose moissanite stones claims actually start.
We quote the band before the design is finalised so the buyer can size the first order to the band rather than discover the mismatch after sampling, and at USD 3-95 for loose moissanite stones it is the one line that cannot be recovered later.
Five Costs That Arrive After the Quote
- Return freight on a rejected tray, which is charged by the courier and not by the factory, and is the line buyers forget when they compare two quotes.
- Re-plating or re-polish after a season, when nominal plating wears through on a fast-moving SKU and the piece comes back through the counter rather than the factory.
- Reship on a sizing drift, because a run that drifts 0.3 mm across sizes produces a second shipment for the same order.
- The certificate you did not ask for at the quote stage, priced at the moment a marketplace or a customs broker asks for it, which is always the expensive moment.
- The air freight to protect a launch date, charged at four to six times the ocean rate, and usually caused by a sample approved two weeks later than the calendar allowed.
These are not hidden in a dishonest sense. They sit outside the scope of a per-piece price, and the only way to see them is to ask for scope in writing, which is where most loose moissanite stones claims actually start.
From Factory Price to Retail
| Line | Amount per piece | Note |
|---|---|---|
| Factory price per piece | USD 3-95 | Ex-works, packing included, certificate per the quote |
| Freight and duty allocation | USD 0-9 | Ocean at 300 pieces; DDP quoted separately |
| Landed cost | USD 3-104 | The number your retail multiple has to clear |
| Retail at 3.0x | USD 9-312 | Typical for a boutique with a 55 to 60 percent margin |
A three-times multiple on landed cost is the working assumption for a US boutique; below 2.6 the loose moissanite stone has to carry the marketing itself. That is why the factory band matters more than the discount.
The multiple is not a pricing opinion, it is a cash constraint. Pieces that sit for two seasons need a higher multiple to pay for the floor space, and pieces that reorder need a lower one, and loose moissanite stones at USD 3-95 is where this shows up first.
Run the arithmetic on the band you will actually order, not on the 500-piece band you hope to reach. The first two orders are what the cash flow has to survive, which is what loose moissanite stones at USD 3-95 actually buys.
Frequently Asked Questions
What is included in the USD 3-95 band for loose moissanite stones?
Piece, packing per the velvet pouch and mailer, and GRA or IGI per the quote on the lots above the threshold. Freight, duty, certificate upgrades and private-label print runs are quoted separately so the band stays comparable, which is where most loose moissanite stones claims actually start.
Why do two suppliers quote the same design so differently?
Almost always the stone grade band or the bench minutes. Ask for the band in writing and for minutes per piece; a difference under ten percent is specification, above twenty is a different product, and at USD 3-95 for loose moissanite stones it is the one line that cannot be recovered later.
Can the metal line be reduced without losing quality?
Yes, by 0.2 mm of shank thickness or by a lighter hollow section, at the cost of resize work later. We quote both and state the trade rather than choosing it for the buyer, and loose moissanite stones at USD 3-95 is where this shows up first.
How much does plating thickness change the price?
Vermeil at 3 microns costs more than rhodium at 0.20 micron, and both cost less than the re-plating a nominal finish triggers. The delta is per lot, not per piece, so small runs see it as a setup line, which is what loose moissanite stones at USD 3-95 actually buys.
Do you quote landed cost?
Yes, as a separate line with the duty assumption stated. DDP is available for US accounts and removes the invoice that otherwise arrives after the carton clears, which is where most loose moissanite stones claims actually start.
Next Step
Send the specification and the quantity band, and the reply breaks the price into the five cost lines with the share of each, so the number can be argued line by line instead of as a whole, and at USD 3-95 for loose moissanite stones it is the one line that cannot be recovered later.
Wuzhou HengliLai Jewelry Co., Ltd. has made loose moissanite stones under the HOLYCOME label since 2009, at a plant in Wuzhou, Guangxi, running roughly 60,000 pieces monthly. Because casting and setting sit in the same building, a gauge change on the bench reaches the next tray the same week rather than the next shipment. Quotes, drawings and inspection sheets go out from service@holycome.com, or WhatsApp +86 18078079070.
Related reading: Loose Moissanite Stones Manufacturer Buying Decision: Which Route to Stock First - HOLYCOME Loose Lab Grown Diamond Stones, Calibrated by Shape Amazon FBA Ready: The Sample Appr - HOLYCOME
