Loose Moissanite Stones
Loose Moissanite Stones Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME
Loose Moissanite Stones: tolerances, cost structure and the reject rule for US wholesale buyers.
Vermeil and Gold Plating Specs for loose Moissanite Stones
Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, the figure being USD 4-152 for a 100-piece run.
We run 3 microns on loose Moissanite Stones for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, and the Vermeil Upgrade quote for it sits at USD 4-152.
The cost difference is real: the USD 4-152 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.
What a Report Proves and What It Does Not in the Vermeil Upgrade Program
A US buyer of loose Moissanite Stones sent us a competitor's loose Moissanite Stone in August with one question: why does this fail at sieve drift after a season. We measured it, rebuilt the spec around size distribution within the declared sieve and zero girdle chips on arrival, and shipped 100 loose Moissanite Stones that cleared inspection with zero rejects, which is how the Vermeil Upgrade account reads it at USD 4-152.
The bench did not miss the defect, it was never asked to look for it. Sieve drift was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, and at USD 4-152 for 100 pieces that is the number the buyer signs.
The rebuild held the USD 4-152 quote and changed the plating log, the gauge and the tray rule. Second run shipped retail box with care card with zero rejects.
Three Failures That Reach the Vermeil Upgrade Bench
sieve drift
A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, which is how the Vermeil Upgrade account reads it at USD 4-152.
In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, and 100 pieces leaves Wuzhou in retail box with care card at USD 4-152.
mixed color lots
Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.
The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.
girdle damage
Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, with GRA report and retail box with care card stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, which is USD 4-152 on the Vermeil Upgrade schedule.
Cost Split on a Vermeil Upgrade Piece at USD 4-152
Buyers assume the stone dominates the cost of a loose Moissanite Stone. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, priced at USD 4-152 for the 100-piece Vermeil Upgrade run.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for loose Moissanite Stones | 32% | Alloy choice and casting yield |
| Stone or melee for loose Moissanite Stones | 23% | Sieve range and lot batching |
| Setting and finishing labor for loose Moissanite Stones | 21% | Jig design and bench minutes |
| Plating, polish and QC for loose Moissanite Stones | 14% | Per-tray versus per-piece checks |
| Packaging for loose Moissanite Stones | 10% | retail box with care card |
The cheapest quote for loose Moissanite Stones usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, and the Vermeil Upgrade quote for it sits at USD 4-152.
Four Spec Lines a Vermeil Upgrade Buyer Checks
A Vermeil Upgrade quote that states only metal and stone size leaves sieve drift undefined, and undefined is what gets rejected on arrival, the figure being USD 4-152 for a 100-piece run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Nothing here adds cost at USD 4-152. It adds documentation, and documentation is what the retail box with care card carton is missing.
Terms Behind a Vermeil Upgrade Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Vermeil Upgrade account reads it at USD 4-152.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 4-152 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Vermeil Upgrade account reads it at USD 4-152.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which the Vermeil Upgrade file records at USD 4-152 in retail box with care card.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 4-152 for a 100-piece run.
How the Second Order Becomes Cheaper
Ask three suppliers of loose Moissanite Stones this question and you will get three answers. Only one of them survives an inspection, which is USD 4-152 on the Vermeil Upgrade schedule.
We run this check per tray rather than per carton because the defect that matters on loose Moissanite Stones is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, priced at USD 4-152 for the 100-piece Vermeil Upgrade run.
The report the buyer receives states the count per tray, the measured average and the outlier count for loose Moissanite Stones. It is deliberately unglamorous, and it is the document that settles most disputes before they start, priced at USD 4-152 for the 100-piece Vermeil Upgrade run.
The Reject Tray Policy That Decides a Partnership
On loose Moissanite Stones, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, and at USD 4-152 for 100 pieces that is the number the buyer signs.
The buyers who get the most out of loose Moissanite Stones treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and at USD 4-152 for 100 pieces that is the number the buyer signs.
We support it directly on loose Moissanite Stones: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, which is how the Vermeil Upgrade account reads it at USD 4-152.
Getting retail box with care card to North American retail
For a Vermeil Upgrade order at 100 pieces the carton count decides the freight more than the weight does. retail box with care card packs tighter than a display tray, on a 100-piece Vermeil Upgrade order at USD 4-152.
The freight rate matters less than the clearance terms at USD 4-152 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of retail box with care card and measure ten pieces against size distribution within the declared sieve. Twenty minutes here saves a season, which is how the Vermeil Upgrade account reads it at USD 4-152.
The Calendar Behind a Vermeil Upgrade Run
The calendar below is what we quote on a 100-piece run of loose Moissanite Stones. It starts when the spec is signed, not when the deposit clears, and the Vermeil Upgrade quote for it sits at USD 4-152.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ stays at 50 pieces per design on the Vermeil Upgrade program, low enough to test a category and high enough to keep the casting line accountable, and at USD 4-152 for 100 pieces that is the number the buyer signs.
The First Vermeil Upgrade Order
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, the figure being USD 4-152 for a 100-piece run.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 100 pieces the calendar is the same on every Vermeil Upgrade run, which is USD 4-152 on the Vermeil Upgrade schedule.
Frequently Asked Questions
How long does a reorder of the same loose Moissanite Stone take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified GRA report and packed retail box with care card at 100 pieces.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white loose Moissanite Stones, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, certified GRA report and packed retail box with care card at 100 pieces.
How is loose Moissanite Stones packed for retail box with care card?
Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 4-152 per piece in retail box with care card.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 4-152 on the Vermeil Upgrade schedule.
How long does a reorder of the same loose Moissanite Stone take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified GRA report and packed retail box with care card at 100 pieces.
Next Step
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, and at USD 4-152 for 100 pieces that is the number the buyer signs.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across loose Moissanite Stones and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, shipped as retail box with care card and certified GRA report.
Related reading: Loose Moissanite Stones Amazon FBA Ready: The Sample Approval That Survives Productio - HOLYCOME Loose Lab Grown Diamond Stones, Calibrated by Shape Made to Order: Carton Cube, Duty - HOLYCOME
