Marquise Cut Lab Grown Diamond
Marquise Cut Lab Grown Diamond Distributor Tier: What the Quote Actually Covers - HOLYCOME
Marquise Cut Lab Grown Diamond: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Distributor Tier Quote Looks Cheap Until It Lands
Two buyers ordered the same marquise Cut Lab Grown Diamond in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was certificate mismatch, and it was measurable on both benches, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Nothing in that rejection was exotic. At USD 114-931 per piece and 800 pieces on the order, a certificate mismatch rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 26 seconds per piece. On 800 pieces that is a few hours at the bench and the whole claim file disappears, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What a USD 114-931 Quote Hides
The cost of a marquise Cut Lab Grown Diamond in the USD 114-931 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for marquise Cut Lab Grown Diamond | 34% | Alloy choice and casting yield |
| Stone or melee for marquise Cut Lab Grown Diamond | 25% | Sieve range and lot batching |
| Setting and finishing labor for marquise Cut Lab Grown Diamond | 22% | Jig design and bench minutes |
| Plating, polish and QC for marquise Cut Lab Grown Diamond | 15% | Per-tray versus per-piece checks |
| Packaging for marquise Cut Lab Grown Diamond | 4% | bulk carton, 50 per bag |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
The Measurements Behind a USD 114-931 Quote
Four numbers separate a 800-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Distributor Pricing Tiers on marquise Cut Lab Grown Diamond
A distributor does not buy a marquise Cut Lab Grown Diamond, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, priced at USD 114-931 for the 800-piece Distributor Tier run.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, which is how the Distributor Tier account reads it at USD 114-931.
Turn is the number the distributor manages. At USD 114-931 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of marquise Cut Lab Grown Diamond move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on marquise Cut Lab Grown Diamond
certificate mismatch
A stone whose report says VS1 but whose plot shows a cloud near the table reads as a grade dispute at the counter. Match the plot, not only the grade line, on a 800-piece Distributor Tier order at USD 114-931.
Our countermeasure is a gauge and a written limit. It adds about 26 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
growth-method disclosure
CVD and HPHT stones behave differently under high heat during setting. Disclosing the method protects both sides in a repair claim, which the Distributor Tier file records at USD 114-931 in bulk carton, 50 per bag.
In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring report plot match at the tray level, not inspecting the finished carton, on a 800-piece Distributor Tier order at USD 114-931.
table percentage variance
A 62% table in a bright cut reads dark in a store window. Buying by table percentage, not only by carat, keeps the display consistent, shipped as bulk carton, 50 per bag and certified SGS batch report.
The commercial effect is stone replacement at a four-figure cost, plus a disclosure review. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as bulk carton, 50 per bag and certified SGS batch report.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 114-931 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and at USD 114-931 for 800 pieces that is the number the buyer signs.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of report plot match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, shipped as bulk carton, 50 per bag and certified SGS batch report.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 114-931 on the Distributor Tier schedule.
Sample to Container: The Real Calendar
Buyers ask it in the first call about marquise Cut Lab Grown Diamond and rarely get a number they can put in a spreadsheet, which is how the Distributor Tier account reads it at USD 114-931.
One practical note on timing for marquise Cut Lab Grown Diamond: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
We date the marquise Cut Lab Grown Diamond proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, which is how the Distributor Tier account reads it at USD 114-931.
AQL, Tray Checks and What a QC Report Should Say
The answer for marquise Cut Lab Grown Diamond depends on four variables, and three of them are under the buyer's control, quoted at USD 114-931 per piece in bulk carton, 50 per bag.
In US wholesale terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For marquise Cut Lab Grown Diamond, we publish the figure per SKU and hold it for the order window rather than for the calendar year, and the Distributor Tier quote for it sits at USD 114-931.
Practically, it shows up in three places for marquise Cut Lab Grown Diamond: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, on a 800-piece Distributor Tier order at USD 114-931.
From Spec to bulk carton, 50 per bag
The calendar below is what we quote on a 800-piece Distributor Tier run of marquise Cut Lab Grown Diamond. It starts when the spec is signed, not when the deposit clears, and the Distributor Tier quote for it sits at USD 114-931.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order of 50 pieces is a measurement, not a purchase. It tells you what report plot match looks like from this bench, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The Dock Check on marquise Cut Lab Grown Diamond
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. SGS batch report travels with the shipping documents, priced at USD 114-931 for the 800-piece Distributor Tier run.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Distributor Tier order at USD 114-931.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, and at USD 114-931 for 800 pieces that is the number the buyer signs.
A 800-Piece Test Run
At 800 pieces inside bulk carton, 50 per bag, the first order reads sell-through without betting the season on one model, and at USD 114-931 for 800 pieces that is the number the buyer signs.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, on a 800-piece Distributor Tier order at USD 114-931.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white marquise Cut Lab Grown Diamond, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 114-931.
How is marquise Cut Lab Grown Diamond packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, shipped as bulk carton, 50 per bag and certified SGS batch report.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 114-931 for the 800-piece Distributor Tier run.
How long does a reorder of the same marquise Cut Lab Grown Diamond take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 114-931 for 800 pieces that is the number the buyer signs.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white marquise Cut Lab Grown Diamond, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is how the Distributor Tier account reads it at USD 114-931.
Next Step
If you are quoting marquise Cut Lab Grown Diamond against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, the figure being USD 114-931 for a 800-piece run.
The factory behind marquise Cut Lab Grown Diamond here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 114-931.
Related reading: Marquise Cut Lab Grown Diamond Trade Show Sample: MOQ, Mixed Designs and the Real Fir - HOLYCOME Radiant Cut Lab Grown Diamond Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
