Marquise Cut Moissanite
Marquise Cut Moissanite Private Label Carton: Alloy, Karat and the Cost of a Color Ch - HOLYCOME
Marquise Cut Moissanite: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Private Label Carton Quote Looks Cheap Until It Lands
In August, a US buyer of marquise Cut Moissanite ordered 200 marquise Cut Moissanite and asked for the same round brilliant and step cuts from 3 mm to 12 mm as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, the figure being USD 33-228 for a 200-piece run.
Nothing in that rejection was exotic. At USD 33-228 per piece and 200 pieces on the order, a double refraction read rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 17 seconds per piece. On 200 pieces that is a few hours at the bench and the whole claim file disappears, which is how the Private Label Carton account reads it at USD 33-228.
The Measurements Behind a USD 33-228 Quote
Four numbers separate a 200-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, certified GRA report and packed private-label carton with hangtag at 200 pieces.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, which the Private Label Carton file records at USD 33-228 in private-label carton with hangtag.
Private Label Packaging for marquise Cut Moissanite
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, the figure being USD 33-228 for a 200-piece run.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin marquise Cut Moissanite. Below 0.8 mm of shank width we recommend the hangtag only, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, which is USD 33-228 on the Private Label Carton schedule.
What a USD 33-228 Quote Hides
The cost of a marquise Cut Moissanite in the USD 33-228 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for marquise Cut Moissanite | 34% | Alloy choice and casting yield |
| Stone or melee for marquise Cut Moissanite | 25% | Sieve range and lot batching |
| Setting and finishing labor for marquise Cut Moissanite | 22% | Jig design and bench minutes |
| Plating, polish and QC for marquise Cut Moissanite | 15% | Per-tray versus per-piece checks |
| Packaging for marquise Cut Moissanite | 4% | private-label carton with hangtag |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, certified GRA report and packed private-label carton with hangtag at 200 pieces, which the Private Label Carton file records at USD 33-228 in private-label carton with hangtag.
What Fails First on marquise Cut Moissanite
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, on a 200-piece Private Label Carton order at USD 33-228.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 33-228.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, the figure being USD 33-228 for a 200-piece run.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as private-label carton with hangtag and certified GRA report.
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, which is USD 33-228 on the Private Label Carton schedule.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 33-228 for a 200-piece run.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 33-228.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 33-228 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 33-228 for a 200-piece run.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, priced at USD 33-228 for the 200-piece Private Label Carton run.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, with GRA report and private-label carton with hangtag stated on the same sheet.
The Sample Approval That Survives Production
The figure below is what we quote for marquise Cut Moissanite, and it is deliberately narrower than the market average, with GRA report and private-label carton with hangtag stated on the same sheet.
The commercial version of this question for marquise Cut Moissanite is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, quoted at USD 33-228 per piece in private-label carton with hangtag.
That clause matters more than a discount on marquise Cut Moissanite. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, which is USD 33-228 on the Private Label Carton schedule.
How the Second Order Becomes Cheaper
Most marquise Cut Moissanite disputes we arbitrate trace back to this line, not to the defect itself, certified GRA report and packed private-label carton with hangtag at 200 pieces.
We run this check per tray rather than per carton because the defect that matters on marquise Cut Moissanite is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, which is USD 33-228 on the Private Label Carton schedule.
The report the buyer receives states the count per tray, the measured average and the outlier count for marquise Cut Moissanite. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 33-228.
From Spec to private-label carton with hangtag
The calendar below is what we quote on a 200-piece Private Label Carton run of marquise Cut Moissanite. It starts when the spec is signed, not when the deposit clears, priced at USD 33-228 for the 200-piece Private Label Carton run.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
A first order of 50 pieces is a measurement, not a purchase. It tells you what color consistency within one lot looks like from this bench, shipped as private-label carton with hangtag and certified GRA report, with GRA report and private-label carton with hangtag stated on the same sheet.
A 200-Piece Test Run
At 200 pieces inside private-label carton with hangtag, the first order reads sell-through without betting the season on one model, which the Private Label Carton file records at USD 33-228 in private-label carton with hangtag.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, priced at USD 33-228 for the 200-piece Private Label Carton run.
The Dock Check on marquise Cut Moissanite
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. GRA report travels with the shipping documents, and the Private Label Carton quote for it sits at USD 33-228.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Private Label Carton order at USD 33-228.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, on a 200-piece Private Label Carton order at USD 33-228.
Frequently Asked Questions
What is the minimum order for marquise Cut Moissanite?
50 pieces per marquise Cut Moissanite. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 33-228 for the 200-piece Private Label Carton run.
Do you supply certificates for marquise Cut Moissanite?
GRA report on marquise Cut Moissanite above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of color consistency within one lot, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 33-228.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if double refraction read shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which is USD 33-228 on the Private Label Carton schedule.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and the Private Label Carton quote for it sits at USD 33-228.
What is the minimum order for marquise Cut Moissanite?
50 pieces per marquise Cut Moissanite. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 33-228 for the 200-piece Private Label Carton run.
Next Step
If you are quoting marquise Cut Moissanite against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, and the Private Label Carton quote for it sits at USD 33-228.
The factory behind marquise Cut Moissanite here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, with GRA report and private-label carton with hangtag stated on the same sheet.
Related reading: Marquise Cut Moissanite Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME Marquise Cut Moissanite Valentine Program: AQL, Tray Checks and What a QC Report Shou - HOLYCOME
