Moissanite Jewelry
Moissanite Jewelry Made to Order: Carton Cube, Duty and the Freight Line That Surpris - HOLYCOME
Moissanite Jewelry: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Made to Order Quote Looks Cheap Until It Lands
In May, a US buyer of moissanite Jewelry ordered 50 moissanite Jewelry and asked for the same round brilliant and step cuts from 3 mm to 12 mm as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
Nothing in that rejection was exotic. At USD 35-237 per piece and 50 pieces on the order, a double refraction read rate of two percent is a costing error rather than a quality mystery.
Cost of the fix was about 17 seconds per piece. On 50 pieces that is a few hours at the bench and the whole claim file disappears, which the Made to Order file records at USD 35-237 in single-piece foam box.
The Made-to-Order Path for moissanite Jewelry
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, with IGI report and single-piece foam box stated on the same sheet.
Twenty days is realistic for a new moissanite Jewelry when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, quoted at USD 35-237 per piece in single-piece foam box.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, and the Made to Order quote for it sits at USD 35-237.
What Fails First on moissanite Jewelry
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, which is how the Made to Order account reads it at USD 35-237.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 35-237 for the 50-piece Made to Order run.
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, which the Made to Order file records at USD 35-237 in single-piece foam box.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, with IGI report and single-piece foam box stated on the same sheet.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, priced at USD 35-237 for the 50-piece Made to Order run.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Made to Order quote for it sits at USD 35-237.
The Measurements Behind a USD 35-237 Quote
Four numbers separate a 50-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, which is USD 35-237 on the Made to Order schedule.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, which is USD 35-237 on the Made to Order schedule.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 35-237 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, on a 50-piece Made to Order order at USD 35-237.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is USD 35-237 on the Made to Order schedule.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 35-237 per piece in single-piece foam box.
What a USD 35-237 Quote Hides
The cost of a moissanite Jewelry in the USD 35-237 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for moissanite Jewelry | 34% | Alloy choice and casting yield |
| Stone or melee for moissanite Jewelry | 25% | Sieve range and lot batching |
| Setting and finishing labor for moissanite Jewelry | 22% | Jig design and bench minutes |
| Plating, polish and QC for moissanite Jewelry | 15% | Per-tray versus per-piece checks |
| Packaging for moissanite Jewelry | 4% | single-piece foam box |
If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, with IGI report and single-piece foam box stated on the same sheet, quoted at USD 35-237 per piece in single-piece foam box.
What a Report Proves and What It Does Not
The figure below is what we quote for moissanite Jewelry, and it is deliberately narrower than the market average, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
Three numbers decide it for moissanite Jewelry: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, certified IGI report and packed single-piece foam box at 50 pieces.
We send a one-page sheet with every moissanite Jewelry quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, certified IGI report and packed single-piece foam box at 50 pieces.
The Sample Approval That Survives Production
Most moissanite Jewelry disputes we arbitrate trace back to this line, not to the defect itself, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on moissanite Jewelry and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, on a 50-piece Made to Order order at USD 35-237.
We would rather lose a first order of moissanite Jewelry on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, quoted at USD 35-237 per piece in single-piece foam box.
A 50-Piece Test Run
At 50 pieces inside single-piece foam box, the first order reads sell-through without betting the season on one model, quoted at USD 35-237 per piece in single-piece foam box.
Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, certified IGI report and packed single-piece foam box at 50 pieces, which is USD 35-237 on the Made to Order schedule.
The Dock Check on moissanite Jewelry
We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. IGI report travels with the shipping documents, which the Made to Order file records at USD 35-237 in single-piece foam box.
DDP removes the duty invoice that arrives after the carton clears, which matters on a first Made to Order order at USD 35-237.
Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, which the Made to Order file records at USD 35-237 in single-piece foam box.
From Spec to single-piece foam box
The calendar below is what we quote on a 50-piece Made to Order run of moissanite Jewelry. It starts when the spec is signed, not when the deposit clears, on a 50-piece Made to Order order at USD 35-237.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
A first order of 50 pieces is a measurement, not a purchase. It tells you what color consistency within one lot looks like from this bench, and the Made to Order quote for it sits at USD 35-237.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as single-piece foam box and certified IGI report.
How long does a reorder of the same moissanite Jewelry take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Made to Order file records at USD 35-237 in single-piece foam box.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white moissanite Jewelry, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, shipped as single-piece foam box and certified IGI report.
How is moissanite Jewelry packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, with IGI report and single-piece foam box stated on the same sheet.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as single-piece foam box and certified IGI report.
Next Step
If you are quoting moissanite Jewelry against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, the figure being USD 35-237 for a 50-piece run.
The factory behind moissanite Jewelry here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, the figure being USD 35-237 for a 50-piece run.
Related reading: Moissanite Jewelry Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME Moissanite Jewelry Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME
