Moissanite Rings
Moissanite Rings Distributor Tier: What the Quote Actually Covers - HOLYCOME
Moissanite Rings: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Distributor Tier Quote Looks Cheap Until It Lands
In January, a US buyer of moissanite Rings ordered 800 moissanite Rings and asked for the same round brilliant and step cuts from 3 mm to 12 mm as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, which is how the Distributor Tier account reads it at USD 26-180.
In the Distributor Tier file the failure was already written down. Double refraction read sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
The second run shipped bulk carton, 50 per bag with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What a USD 26-180 Quote Hides
The 800-piece Distributor Tier price splits as below. The line that decides season two is the plating and QC share, not the metal, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 26-180.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for moissanite Rings | 34% | Alloy choice and casting yield |
| Stone or melee for moissanite Rings | 25% | Sieve range and lot batching |
| Setting and finishing labor for moissanite Rings | 22% | Jig design and bench minutes |
| Plating, polish and QC for moissanite Rings | 15% | Per-tray versus per-piece checks |
| Packaging for moissanite Rings | 4% | bulk carton, 50 per bag |
Five lines, one price. If the supplier will not break them out, the number being compared is not a moissanite Rings price, with SGS batch report and bulk carton, 50 per bag stated on the same sheet, which is USD 26-180 on the Distributor Tier schedule.
The Measurements Behind a USD 26-180 Quote
Specification is the only part of a moissanite Rings quote that survives the season. These four measurements are what we write into the bulk carton, 50 per bag paperwork, priced at USD 26-180 for the 800-piece Distributor Tier run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Every line above is measurable with a gauge and a scale. At USD 26-180 per piece, a supplier who cannot state them is selling a photo.
Distributor Pricing Tiers on moissanite Rings
A distributor does not buy a moissanite Ring, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which is how the Distributor Tier account reads it at USD 26-180.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 26-180.
Turn is the number the distributor manages. At USD 26-180 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of moissanite Rings move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on moissanite Rings
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, priced at USD 26-180 for the 800-piece Distributor Tier run.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 26-180 for the 800-piece Distributor Tier run.
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, which is how the Distributor Tier account reads it at USD 26-180.
In a 800-piece run this typically shows on 11 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, quoted at USD 26-180 per piece in bulk carton, 50 per bag.
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, which the Distributor Tier file records at USD 26-180 in bulk carton, 50 per bag.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Distributor Tier quote for it sits at USD 26-180.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 26-180 for a 800-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 26-180 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 26-180 in bulk carton, 50 per bag.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 26-180.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 26-180 per piece in bulk carton, 50 per bag.
Sample to Container: The Real Calendar
Every year we see the same omission in moissanite Rings spec sheets, and every year it costs a buyer a season, the figure being USD 26-180 for a 800-piece run.
One practical note on timing for moissanite Rings: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is USD 26-180 on the Distributor Tier schedule.
We date the moissanite Rings proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 26-180.
AQL, Tray Checks and What a QC Report Should Say
The number is less interesting than the rule behind it, and moissanite Rings is where that rule gets tested, priced at USD 26-180 for the 800-piece Distributor Tier run.
In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For moissanite Rings, we publish the figure per SKU and hold it for the order window rather than for the calendar year, quoted at USD 26-180 per piece in bulk carton, 50 per bag.
Practically, it shows up in three places for moissanite Rings: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, on a 800-piece Distributor Tier order at USD 26-180.
From Spec to bulk carton, 50 per bag
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, priced at USD 26-180 for the 800-piece Distributor Tier run.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what color consistency within one lot and girdle integrity after setting looks like from this line, and the Distributor Tier quote for it sits at USD 26-180.
The Dock Check on moissanite Rings
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 26-180.
DDP suits a first Distributor Tier order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, on a 800-piece Distributor Tier order at USD 26-180.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, which the Distributor Tier file records at USD 26-180 in bulk carton, 50 per bag.
A 800-Piece Test Run
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, quoted at USD 26-180 per piece in bulk carton, 50 per bag.
Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is on the order already, which the Distributor Tier file records at USD 26-180 in bulk carton, 50 per bag.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white moissanite Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 26-180.
How is moissanite Rings packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 26-180.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.
How long does a reorder of the same moissanite Ring take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 26-180 in bulk carton, 50 per bag.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white moissanite Rings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 26-180.
Next Step
Send a photo or a drawing of the piece you want in bulk carton, 50 per bag, and the reply carries a price, a calendar and the four measurements, quoted at USD 26-180 per piece in bulk carton, 50 per bag.
The factory behind moissanite Rings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, on a 800-piece Distributor Tier order at USD 26-180.
Related reading: Moissanite Rings Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Moissanite Necklaces Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
