Moissanite Supplier & Manufacturer
Moissanite Supplier & Manufacturer Made to Order: Carton Cube, Duty and the Freight L - HOLYCOME
Moissanite Supplier & Manufacturer: tolerances, cost structure and the reject rule for US wholesale buyers.
Carton Cube, Duty and the Freight Line That Surprises Buyers in the Made to Order Program
A US buyer of moissanite Supplier and Manufacturer came to us after 50 moissanite Supplier and Manufacturer from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: double refraction read had drifted far enough that the buyer's own bench could not correct it without recutting, shipped as single-piece foam box and certified IGI report.
The bench did not miss the defect, it was never asked to look for it. Double refraction read was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, with IGI report and single-piece foam box stated on the same sheet, certified IGI report and packed single-piece foam box at 50 pieces.
The rebuild held the USD 35-237 quote and changed the plating log, the gauge and the tray rule. Second run shipped single-piece foam box with zero rejects.
The Made-to-Order Path for moissanite Supplier and Manufacturer
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which the Made to Order file records at USD 35-237 in single-piece foam box.
Twenty days is realistic for a new moissanite Supplier and Manufacturer when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is USD 35-237 on the Made to Order schedule.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, certified IGI report and packed single-piece foam box at 50 pieces.
Three Failures That Reach the Made to Order Bench
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, shipped as single-piece foam box and certified IGI report.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified IGI report and packed single-piece foam box at 50 pieces.
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, and at USD 35-237 for 50 pieces that is the number the buyer signs.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 35-237 per piece in single-piece foam box.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, quoted at USD 35-237 per piece in single-piece foam box.
In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, quoted at USD 35-237 per piece in single-piece foam box.
Four Spec Lines a Made to Order Buyer Checks
A Made to Order quote that states only metal and stone size leaves double refraction read undefined, and undefined is what gets rejected on arrival, priced at USD 35-237 for the 50-piece Made to Order run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Nothing here adds cost at USD 35-237. It adds documentation, and documentation is what the single-piece foam box carton is missing.
Terms Behind a Made to Order Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 35-237 for a 50-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 35-237 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Made to Order account reads it at USD 35-237.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 35-237 on the Made to Order schedule.
Cost Split on a Made to Order Piece at USD 35-237
Buyers assume the stone dominates the cost of a moissanite Supplier and Manufacturer. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, which is how the Made to Order account reads it at USD 35-237.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for moissanite Supplier and Manufacturer | 32% | Alloy choice and casting yield |
| Stone or melee for moissanite Supplier and Manufacturer | 23% | Sieve range and lot batching |
| Setting and finishing labor for moissanite Supplier and Manufacturer | 21% | Jig design and bench minutes |
| Plating, polish and QC for moissanite Supplier and Manufacturer | 14% | Per-tray versus per-piece checks |
| Packaging for moissanite Supplier and Manufacturer | 10% | single-piece foam box |
The cheapest quote for moissanite Supplier and Manufacturer usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, which the Made to Order file records at USD 35-237 in single-piece foam box.
What a Report Proves and What It Does Not
On moissanite Supplier and Manufacturer, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, shipped as single-piece foam box and certified IGI report.
Three numbers decide it for moissanite Supplier and Manufacturer: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, which the Made to Order file records at USD 35-237 in single-piece foam box.
We send a one-page sheet with every moissanite Supplier and Manufacturer quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, with IGI report and single-piece foam box stated on the same sheet.
The Sample Approval That Survives Production
Buyers in US wholesale tend to over-index on unit price for moissanite Supplier and Manufacturer and under-index on what happens after delivery, and the Made to Order quote for it sits at USD 35-237.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on moissanite Supplier and Manufacturer and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which the Made to Order file records at USD 35-237 in single-piece foam box.
We would rather lose a first order of moissanite Supplier and Manufacturer on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, priced at USD 35-237 for the 50-piece Made to Order run.
The First Made to Order Order
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, which is USD 35-237 on the Made to Order schedule.
Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 50 pieces the calendar is the same on every Made to Order run, certified IGI report and packed single-piece foam box at 50 pieces.
Getting single-piece foam box to US wholesale
For a Made to Order order at 50 pieces the carton count decides the freight more than the weight does. single-piece foam box packs tighter than a display tray, which is how the Made to Order account reads it at USD 35-237.
The freight rate matters less than the clearance terms at USD 35-237 per piece. A duty surprise can cost more than the entire freight line.
At receiving, count cartons, weigh one tray of single-piece foam box and measure ten pieces against color consistency within one lot. Twenty minutes here saves a season, which the Made to Order file records at USD 35-237 in single-piece foam box.
The Calendar Behind a Made to Order Run
The calendar below is what we quote on a 50-piece run of moissanite Supplier and Manufacturer. It starts when the spec is signed, not when the deposit clears, which is how the Made to Order account reads it at USD 35-237.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ stays at 50 pieces per design on the Made to Order program, low enough to test a category and high enough to keep the casting line accountable, and at USD 35-237 for 50 pieces that is the number the buyer signs.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 35-237 for the 50-piece Made to Order run.
How long does a reorder of the same moissanite Supplier and Manufacturer take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 35-237 for 50 pieces that is the number the buyer signs.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white moissanite Supplier and Manufacturer, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 35-237 for a 50-piece run.
How is moissanite Supplier and Manufacturer packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which the Made to Order file records at USD 35-237 in single-piece foam box.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 35-237 for the 50-piece Made to Order run.
Next Step
Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, with IGI report and single-piece foam box stated on the same sheet, shipped as single-piece foam box and certified IGI report.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across moissanite Supplier and Manufacturer and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and the Made to Order quote for it sits at USD 35-237.
Related reading: Moissanite Supplier & Manufacturer Private Label Carton: Alloy, Karat and the Cost of - HOLYCOME Moissanite Supplier & Manufacturer Q4 Holiday Stock: Sample to Container: The Real Ca - HOLYCOME
