Necklaces
Necklaces Private Label Carton: Alloy, Karat and the Cost of a Color Change - HOLYCOME
Necklaces: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Private Label Carton Quote Looks Cheap Until It Lands
Two buyers ordered the same necklace in the same month. One paid 9% less and absorbed 23 rejects out of 200 pieces; the other paid our quote and shipped clean. The difference was clasp fatigue, and it was measurable on both benches, on a 200-piece Private Label Carton order at USD 31-216.
The defect did not surprise us. Clasp fatigue is the predictable output of a run where nobody wrote the tolerance down, and it is the first measurement we take on an incoming necklace, which the Private Label Carton file records at USD 31-216 in private-label carton with hangtag.
We did not discount the quote. We changed the gauge, the seat cut, the plating log and the tray rule, and the second run shipped with zero rejects on clasp pull strength and chain length within +/-3 mm, quoted at USD 31-216 per piece in private-label carton with hangtag.
The Measurements Behind a USD 31-216 Quote
Price is the first thing compared and the last thing that matters. These four measurements decide the return rate on necklaces, and three of them cost nothing to specify, certified GRA report and packed private-label carton with hangtag at 200 pieces, with GRA report and private-label carton with hangtag stated on the same sheet.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Each line is a gauge, not a slogan. A supplier who cannot quote a number for clasp fatigue is quoting an opinion about necklaces, the figure being USD 31-216 for a 200-piece run.
Private Label Packaging for necklaces
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which is USD 31-216 on the Private Label Carton schedule.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin necklace. Below 0.8 mm of shank width we recommend the hangtag only, shipped as private-label carton with hangtag and certified GRA report.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, priced at USD 31-216 for the 200-piece Private Label Carton run.
What a USD 31-216 Quote Hides
The Private Label Carton price of 200 pieces splits as below. The line buyers challenge is labor, and it is the line that decides the second season, certified GRA report and packed private-label carton with hangtag at 200 pieces.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for necklaces | 34% | Alloy choice and casting yield |
| Stone or melee for necklaces | 25% | Sieve range and lot batching |
| Setting and finishing labor for necklaces | 22% | Jig design and bench minutes |
| Plating, polish and QC for necklaces | 15% | Per-tray versus per-piece checks |
| Packaging for necklaces | 4% | private-label carton with hangtag |
Break the USD 31-216 quote into these five lines and the comparison stops being rhetorical.
What Fails First on necklaces
pendant bail shadow
A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, and at USD 31-216 for 200 pieces that is the number the buyer signs.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, on a 200-piece Private Label Carton order at USD 31-216.
clasp fatigue
A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 31-216.
The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Private Label Carton account reads it at USD 31-216.
link stretch
Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, the figure being USD 31-216 for a 200-piece run.
Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 31-216 for the 200-piece Private Label Carton run.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 31-216 per piece in private-label carton with hangtag.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 31-216 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is USD 31-216 on the Private Label Carton schedule.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 31-216 for 200 pieces that is the number the buyer signs.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 31-216.
The Sample Approval That Survives Production
The short version for necklaces: it is arithmetic, not relationship. The long version is below, which is how the Private Label Carton account reads it at USD 31-216.
The commercial version of this question for necklaces is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, and at USD 31-216 for 200 pieces that is the number the buyer signs.
That clause matters more than a discount on necklaces. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, which the Private Label Carton file records at USD 31-216 in private-label carton with hangtag.
How the Second Order Becomes Cheaper
Every year we see the same omission in necklaces spec sheets, and every year it costs a buyer a season, and the Private Label Carton quote for it sits at USD 31-216.
We run this check per tray rather than per carton because the defect that matters on necklaces is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and at USD 31-216 for 200 pieces that is the number the buyer signs.
The report the buyer receives states the count per tray, the measured average and the outlier count for necklaces. It is deliberately unglamorous, and it is the document that settles most disputes before they start, priced at USD 31-216 for the 200-piece Private Label Carton run.
From Spec to private-label carton with hangtag
On 200 pieces of necklaces the calendar starts at the signed spec, not at the deposit, and it ends with private-label carton with hangtag on a pallet, shipped as private-label carton with hangtag and certified GRA report.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
A 50-piece first order at USD 31-216 is a measurement of clasp pull strength, not a commitment to the range.
A 200-Piece Test Run
A test run at 50 pieces tells you three things: whether clasp fatigue is controlled, whether packing survives freight, and whether the count is honest, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 31-216.
Put the reject rule in writing before the deposit. The Private Label Carton conversation after arrival is shorter when the rule is already on the order, priced at USD 31-216 for the 200-piece Private Label Carton run.
The Dock Check on necklaces
Air lands in 5-8 days to the US west coast and sea takes three times the transit. At USD 31-216 per piece the choice is a cash-flow decision.
DDP is available for US accounts that want duty and clearance on our side, and it removes the invoice that arrives after the carton clears, priced at USD 31-216 for the 200-piece Private Label Carton run.
On arrival, weigh a tray and measure ten pieces. Anything outside the band is a claim with evidence rather than a difference of opinion, and the Private Label Carton quote for it sits at USD 31-216.
Frequently Asked Questions
What is the minimum order for necklaces?
50 pieces per necklace. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 31-216 for 200 pieces that is the number the buyer signs.
Do you supply certificates for necklaces?
GRA report on necklaces above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of clasp pull strength, which is what a counter or a listing actually needs, and the Private Label Carton quote for it sits at USD 31-216.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if clasp fatigue shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Private Label Carton file records at USD 31-216 in private-label carton with hangtag.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which the Private Label Carton file records at USD 31-216 in private-label carton with hangtag.
What is the minimum order for necklaces?
50 pieces per necklace. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and at USD 31-216 for 200 pieces that is the number the buyer signs.
Next Step
Send a photo or a drawing of the piece you want in private-label carton with hangtag. We answer with a price, a calendar and the four measurements above, the figure being USD 31-216 for a 200-piece run.
The factory behind necklaces here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, on a 200-piece Private Label Carton order at USD 31-216.
Related reading: Necklaces Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME Necklaces Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME
