New Arrivals
New Arrivals Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME
New Arrivals: tolerances, cost structure and the reject rule for US wholesale buyers.
Vermeil and Gold Plating Specs for new Arrivals
Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, shipped as retail box with care card and certified GRA report.
We run 3 microns on new Arrivals for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, which is how the Vermeil Upgrade account reads it at USD 60-336.
The cost difference is real: the USD 60-336 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.
What a Report Proves and What It Does Not
The brief was simple: 100 new Arrivals, 925 sterling silver, delivered before September. The run that arrived carried 17 pieces with prong geometry, and the buyer spent USD 30-105 on sorting before the goods reached a shelf, and the Vermeil Upgrade quote for it sits at USD 60-336.
On a 100-piece order at USD 60-336, a prong geometry rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, on a 100-piece Vermeil Upgrade order at USD 60-336.
The Three Failures We See Most in Incoming Samples
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which is how the Vermeil Upgrade account reads it at USD 60-336.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 60-336 per piece in retail box with care card.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.
In a 100-piece run this typically shows on 8 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, certified GRA report and packed retail box with care card at 100 pieces.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, and at USD 60-336 for 100 pieces that is the number the buyer signs.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Vermeil Upgrade quote for it sits at USD 60-336.
Where USD 60-336 Per Piece Actually Goes
Cost at USD 60-336 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for new Arrivals | 30% | Alloy choice and casting yield |
| Stone or melee for new Arrivals | 20% | Sieve range and lot batching |
| Setting and finishing labor for new Arrivals | 19% | Jig design and bench minutes |
| Plating, polish and QC for new Arrivals | 12% | Per-tray versus per-piece checks |
| Packaging for new Arrivals | 19% | retail box with care card |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.
What US buyers Check Before They Sign
At USD 60-336 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
Write these into the Vermeil Upgrade purchase order and the arrival check becomes arithmetic instead of recollection, which is how the Vermeil Upgrade account reads it at USD 60-336.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 60-336 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 60-336 per piece in retail box with care card.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as retail box with care card and certified GRA report.
How the Second Order Becomes Cheaper
The short version for new Arrivals: it is arithmetic, not relationship. The long version is below, shipped as retail box with care card and certified GRA report.
We run this check per tray rather than per carton because the defect that matters on new Arrivals is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, shipped as retail box with care card and certified GRA report.
The report the buyer receives states the count per tray, the measured average and the outlier count for new Arrivals. It is deliberately unglamorous, and it is the document that settles most disputes before they start, and the Vermeil Upgrade quote for it sits at USD 60-336.
The Reject Tray Policy That Decides a Partnership
Every year we see the same omission in new Arrivals spec sheets, and every year it costs a buyer a season, and at USD 60-336 for 100 pieces that is the number the buyer signs.
The buyers who get the most out of new Arrivals treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, which is USD 60-336 on the Vermeil Upgrade schedule.
We support it directly on new Arrivals: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, which is how the Vermeil Upgrade account reads it at USD 60-336.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, quoted at USD 60-336 per piece in retail box with care card.
FOB is the default on new Arrivals and DDP is the option. Buyers new to the American bridal market usually take DDP once, then switch after they see the breakdown, certified GRA report and packed retail box with care card at 100 pieces, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.
If prong geometry appears in the arrival check, the retained tray decides who owns it. Keep the GRA report batch sheet in the same folder as the packing list, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.
How a Repeat Order Gets Built
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, which is how the Vermeil Upgrade account reads it at USD 60-336.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.
What This Means for a First Order
A first Vermeil Upgrade order of 50 pieces per design at USD 60-336 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the GRA report batch sheet with the first shipment. Both are free and both decide the reorder, and at USD 60-336 for 100 pieces that is the number the buyer signs.
Frequently Asked Questions
How long does a reorder of the same new Arrival take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, the figure being USD 60-336 for a 100-piece run.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white new Arrivals, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 60-336 for a 100-piece run.
How is new Arrivals packed for retail box with care card?
Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, certified GRA report and packed retail box with care card at 100 pieces.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, on a 100-piece Vermeil Upgrade order at USD 60-336.
How long does a reorder of the same new Arrival take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, the figure being USD 60-336 for a 100-piece run.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Vermeil Upgrade, and the Vermeil Upgrade quote for it sits at USD 60-336.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, with GRA report and retail box with care card stated on the same sheet.
Related reading: New Arrivals Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME Wholesale Lots Made to Order: Carton Cube, Duty and the Freight Line That Surprises B - HOLYCOME
