Radiant Cut Moissanite
Radiant Cut Moissanite OEM Pricing: 5 Cost Lines Behind the Quote - HOLYCOME
Radiant Cut Moissanite: tolerances, cost structure and the reject rule for US wholesale buyers.
Answer First, Arithmetic After
The honest answer is that a radiant cut moissanite quote is five costs wearing one number. Metal, stone, bench labor, finishing and packing each move for a different reason, and a supplier that will not separate them is asking you to compare a total against a total with no scope attached.
Where the USD 28-190 Band Goes
Use this to audit any quote. If the stone share is far below the row below, the grade moved. If the labor share is far below, the finishing moved to a per-tray check, and that is where the rejects come from, and radiant cut moissanite at USD 28-190 is where this shows up first.
| Cost line | Share of piece | What moves it | Who controls it |
|---|---|---|---|
| Metal for the radiant cut moissanite | 34% | Alloy choice, shank thickness and casting yield | Factory |
| Stone and melee in radiant cut moissanite | 20% | Sieve range, grade band and lot batching | Market plus grade |
| Bench labor per piece | 21% | Setting type, prong count and jig design | Factory |
| Finishing and plating | 15% | Plating micron, polish passes and pre-plate inspection | Factory |
| Packing and the poly bag and hangtag | 10% | Pouch, box, print run and carton count | Buyer choice |
A quote with no split is a quote with no scope. Ask for the five lines and the answer will usually tell you which line the supplier was protecting, which is what radiant cut moissanite at USD 28-190 actually buys.
Line by Line
Where the metal line sits
Metal is the least negotiable line in a radiant cut moissanite quote, because it is bought by weight and priced by weight. What a factory controls is thickness and yield: a shank 0.2 mm thinner saves a few percent of metal and costs a resizing later, and a casting yield two points better saves more than any discount conversation. Ask for the gram weight per piece at the quoted size, not for a percentage off.
Where the stone line sits
The stone line is where two quotes for the same drawing diverge by double digits, and almost never because one factory is cheaper. It diverges because one is quoting a grade band and the other is quoting a grade. Ask for the band in writing: colour range, clarity range, mm tolerance. A radiant cut moissanite at USD 28-190 with a wide band and one at the same price with a narrow band are not the same product.
Where the labor line sits
Bench minutes decide the labor share, and the setting type decides the minutes. A prong setting and a bezel on the same radiant cut moissanite can differ by several minutes per piece, which at 500 pieces is the difference between one quote and another. Ask for minutes per piece and for the jig that holds the repeat, because a jig is what makes a reorder cost less than the first run.
Where the finishing line sits
Finishing is the cheapest line to specify and the most expensive to skip. Rhodium at 0.20 micron with a palladium strike reads white through a season; nominal plating reads white at the counter and yellow at the third month. Pre-plate inspection of casting porosity belongs here too, because plating a porous surface is a six-week delay on a complaint rather than a fix, which is where most radiant cut moissanite claims actually start.
Where the packing and freight line sits
Packing is a buyer choice, so it should be quoted separately from the piece. The poly bag and hangtag carries a print run, a carton count and a packing list, and all three are priced per order rather than per piece. Freight is the one line that is not a cost of the radiant cut moissanite at all, which is why landed cost belongs on a second sheet.
What Changes Between Bands
| Quantity band | Unit price | What changes |
|---|---|---|
| 50 to 200 pieces | USD 28-190 | Setup amortised over a small run; gauge and sample already paid |
| 200 to 500 pieces | USD 25-174 | Jig and fixture amortised; stone bought in a matched lot |
| 500 pieces and above | USD 23-161 | Dedicated stone procurement and a reserved production slot |
The ladder is arithmetic, not a volume trick. The setup, the gauge and the sample are fixed costs; the metal and stone are not. Splitting them explains why the third band moves less than the second, which is where most radiant cut moissanite claims actually start.
A buyer comparing a 50-piece quote with a 500-piece quote is comparing two different products. Compare bands, then decide which band your first two orders actually sit in, because that is the number your margin has to survive, and at USD 28-190 for radiant cut moissanite it is the one line that cannot be recovered later.
We quote the band before the design is finalised so the buyer can size the first order to the band rather than discover the mismatch after sampling, and radiant cut moissanite at USD 28-190 is where this shows up first.
Five Costs That Arrive After the Quote
- Return freight on a rejected tray, which is charged by the courier and not by the factory, and is the line buyers forget when they compare two quotes.
- Re-plating or re-polish after a season, when nominal plating wears through on a fast-moving SKU and the piece comes back through the counter rather than the factory.
- Reship on a sizing drift, because a run that drifts 0.3 mm across sizes produces a second shipment for the same order.
- The certificate you did not ask for at the quote stage, priced at the moment a marketplace or a customs broker asks for it, which is always the expensive moment.
- The air freight to protect a launch date, charged at four to six times the ocean rate, and usually caused by a sample approved two weeks later than the calendar allowed.
These are not hidden in a dishonest sense. They sit outside the scope of a per-piece price, and the only way to see them is to ask for scope in writing, and at USD 28-190 for radiant cut moissanite it is the one line that cannot be recovered later.
From Factory Price to Retail
| Line | Amount per piece | Note |
|---|---|---|
| Factory price per piece | USD 28-190 | Ex-works, packing included, certificate per the quote |
| Freight and duty allocation | USD 3-22 | Ocean at 500 pieces; DDP quoted separately |
| Landed cost | USD 31-212 | The number your retail multiple has to clear |
| Retail at 3.0x | USD 93-636 | Typical for a boutique with a 55 to 60 percent margin |
A three-times multiple on landed cost is the working assumption for a US boutique; below 2.6 the radiant cut moissanite has to carry the marketing itself. That is why the factory band matters more than the discount.
The multiple is not a pricing opinion, it is a cash constraint. Pieces that sit for two seasons need a higher multiple to pay for the floor space, and pieces that reorder need a lower one, which is what radiant cut moissanite at USD 28-190 actually buys.
Run the arithmetic on the band you will actually order, not on the 500-piece band you hope to reach. The first two orders are what the cash flow has to survive, which is where most radiant cut moissanite claims actually start.
Frequently Asked Questions
What is included in the USD 28-190 band for radiant cut moissanite?
Piece, packing per the poly bag and hangtag, and GRA or IGI per the quote on the lots above the threshold. Freight, duty, certificate upgrades and private-label print runs are quoted separately so the band stays comparable, and at USD 28-190 for radiant cut moissanite it is the one line that cannot be recovered later.
Why do two suppliers quote the same design so differently?
Almost always the stone grade band or the bench minutes. Ask for the band in writing and for minutes per piece; a difference under ten percent is specification, above twenty is a different product, and radiant cut moissanite at USD 28-190 is where this shows up first.
Can the metal line be reduced without losing quality?
Yes, by 0.2 mm of shank thickness or by a lighter hollow section, at the cost of resize work later. We quote both and state the trade rather than choosing it for the buyer, which is what radiant cut moissanite at USD 28-190 actually buys.
How much does plating thickness change the price?
Vermeil at 3 microns costs more than rhodium at 0.20 micron, and both cost less than the re-plating a nominal finish triggers. The delta is per lot, not per piece, so small runs see it as a setup line, which is where most radiant cut moissanite claims actually start.
Do you quote landed cost?
Yes, as a separate line with the duty assumption stated. DDP is available for US accounts and removes the invoice that otherwise arrives after the carton clears, and at USD 28-190 for radiant cut moissanite it is the one line that cannot be recovered later.
Next Step
Send the specification and the quantity band, and the reply breaks the price into the five cost lines with the share of each, so the number can be argued line by line instead of as a whole, and radiant cut moissanite at USD 28-190 is where this shows up first.
Wuzhou HengliLai Jewelry Co., Ltd. has made radiant cut moissanite under the HOLYCOME label since 2009, at a plant in Wuzhou, Guangxi, running roughly 60,000 pieces monthly. Because casting and setting sit in the same building, a gauge change on the bench reaches the next tray the same week rather than the next shipment. Quotes, drawings and inspection sheets go out from service@holycome.com, or WhatsApp +86 18078079070.
Related reading: Radiant Cut Moissanite Manufacturer Buying Decision: Which Route to Stock First - HOLYCOME Heart Cut Moissanite Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME
