Wholesale Lots
Wholesale Lots Distributor Tier: What the Quote Actually Covers - HOLYCOME
Wholesale Lots: tolerances, cost structure and the reject rule for US wholesale buyers.
Why the Distributor Tier Quote Looks Cheap Until It Lands
Two buyers ordered the same wholesale Lot in the same month. One paid 9% less and absorbed 23 rejects out of 800 pieces; the other paid our quote and shipped clean. The difference was prong geometry, and it was measurable on both benches, priced at USD 36-199 for the 800-piece Distributor Tier run.
In the Distributor Tier file the failure was already written down. Prong geometry sat in the buyer's own incoming report from the previous season and nobody carried it forward, so the same line failed twice, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
The second run shipped bulk carton, 50 per bag with the spec stapled to the packing list. Zero rejects on arrival, and the buyer's own bench stopped re-inspecting, and the Distributor Tier quote for it sits at USD 36-199.
What a USD 36-199 Quote Hides
The 800-piece Distributor Tier price splits as below. The line that decides season two is the plating and QC share, not the metal, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for wholesale Lots | 34% | Alloy choice and casting yield |
| Stone or melee for wholesale Lots | 25% | Sieve range and lot batching |
| Setting and finishing labor for wholesale Lots | 22% | Jig design and bench minutes |
| Plating, polish and QC for wholesale Lots | 15% | Per-tray versus per-piece checks |
| Packaging for wholesale Lots | 4% | bulk carton, 50 per bag |
Five lines, one price. If the supplier will not break them out, the number being compared is not a wholesale Lots price, and the Distributor Tier quote for it sits at USD 36-199.
The Measurements Behind a USD 36-199 Quote
Specification is the only part of a wholesale Lots quote that survives the season. These four measurements are what we write into the bulk carton, 50 per bag paperwork, priced at USD 36-199 for the 800-piece Distributor Tier run.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Every line above is measurable with a gauge and a scale. At USD 36-199 per piece, a supplier who cannot state them is selling a photo.
Distributor Pricing Tiers on wholesale Lots
A distributor does not buy a wholesale Lot, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, priced at USD 36-199 for the 800-piece Distributor Tier run.
Turn is the number the distributor manages. At USD 36-199 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of wholesale Lots move in 800-piece lots rather than in the 50-piece sample quantity.
What Fails First on wholesale Lots
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, shipped as bulk carton, 50 per bag and certified SGS batch report.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, priced at USD 36-199 for the 800-piece Distributor Tier run.
MOQ, Samples and the Balance
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 36-199 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 36-199 for 800 pieces that is the number the buyer signs.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 36-199 for a 800-piece run.
Sample to Container: The Real Calendar
This is where wholesale Lots stops being a commodity and starts being a supply relationship, which is how the Distributor Tier account reads it at USD 36-199.
One practical note on timing for wholesale Lots: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, which is USD 36-199 on the Distributor Tier schedule.
We date the wholesale Lots proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
AQL, Tray Checks and What a QC Report Should Say
The figure below is what we quote for wholesale Lots, and it is deliberately narrower than the market average, and the Distributor Tier quote for it sits at USD 36-199.
In US e-commerce terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For wholesale Lots, we publish the figure per SKU and hold it for the order window rather than for the calendar year, and at USD 36-199 for 800 pieces that is the number the buyer signs.
Practically, it shows up in three places for wholesale Lots: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
From Spec to bulk carton, 50 per bag
Our process is deliberately boring, because boring is what survives a bulk run with several sets of hands on it, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 36-199.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
A first order at 50 pieces per design is a measurement rather than a purchase. It tells you what stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm looks like from this line, which is how the Distributor Tier account reads it at USD 36-199.
The Dock Check on wholesale Lots
We ship from Guangzhou or Shenzhen, and the port choice follows the carrier rate rather than a fixed habit, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
DDP suits a first Distributor Tier order because the duty invoice arrives after the carton clears, and that is the line buyers forget to budget, priced at USD 36-199 for the 800-piece Distributor Tier run.
The arrival check is three steps and none needs a lab: count against the packing list, weigh a sample, measure ten pieces, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, which is how the Distributor Tier account reads it at USD 36-199.
A 800-Piece Test Run
The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, the figure being USD 36-199 for a 800-piece run.
Put the reject rule in writing before the deposit. The Distributor Tier conversation after arrival is shorter when the rule is on the order already, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white wholesale Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
How is wholesale Lots packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 36-199 on the Distributor Tier schedule.
How long does a reorder of the same wholesale Lot take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white wholesale Lots, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Distributor Tier file records at USD 36-199 in bulk carton, 50 per bag.
Next Step
Send a photo or a drawing of the piece you want in bulk carton, 50 per bag, and the reply carries a price, a calendar and the four measurements, the figure being USD 36-199 for a 800-piece run.
The factory behind wholesale Lots here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, quoted at USD 36-199 per piece in bulk carton, 50 per bag.
Related reading: Wholesale Lots Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Moissanite Jewelry Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
