925 Sterling Silver Jewelry Wholesale
925 Sterling Silver Jewelry Wholesale Made to Order: Carton Cube, Duty and the Freigh - HOLYCOME
925 Sterling Silver Jewelry Wholesale: tolerances, cost structure and the reject rule for US wholesale buyers.
Carton Cube, Duty and the Freight Line That Surprises Buyers
The brief was simple: 50 925 Sterling Silver Jewelry Wholesale, 925 sterling silver with rhodium or e-coat, delivered before April. The run that arrived carried 17 pieces with tarnish in transit, and the buyer spent USD 10-30 on sorting before the goods reached a shelf, and at USD 10-52 for 50 pieces that is the number the buyer signs.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and tarnish in transit is what a photograph fails to define, priced at USD 10-52 for the 50-piece Made to Order run.
The fix cost about 11 seconds per 925 Sterling Silver Jewelry Wholesale and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, and the Made to Order quote for it sits at USD 10-52.
The Made-to-Order Path for 925 Sterling Silver Jewelry Wholesale
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, quoted at USD 10-52 per piece in single-piece foam box.
Twenty days is realistic for a new 925 Sterling Silver Jewelry Wholesale when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, priced at USD 10-52 for the 50-piece Made to Order run.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, the figure being USD 10-52 for a 50-piece run.
The Three Failures We See Most in Incoming Samples
rhodium adhesion
A silver surface plated without a palladium strike layer blisters in wear. The strike layer is invisible and essential, which the Made to Order file records at USD 10-52 in single-piece foam box.
In a 50-piece run this typically shows on 11 of pieces. Catching it means measuring silver assay at 92.5% minimum at the tray level, not inspecting the finished carton, shipped as single-piece foam box and certified IGI report.
weight shortfall
A 2.1 g ring shipped at 1.85 g passes a casual check and fails a scale. Publish the weighed average per SKU, priced at USD 10-52 for the 50-piece Made to Order run.
The commercial effect is tarnish claims and replacements, typically USD 4-7 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Made to Order file records at USD 10-52 in single-piece foam box.
tarnish in transit
Silver that ships without an anti-tarnish strip browns in a humid container. The strip costs 3 cents and removes the most common arrival complaint, on a 50-piece Made to Order order at USD 10-52.
Our countermeasure is a gauge and a written limit. It adds about 11 seconds per piece and removes the defect from the run rather than from the carton, on a 50-piece Made to Order order at USD 10-52.
What US buyers Check Before They Sign
Four lines decide whether 925 Sterling Silver Jewelry Wholesale at USD 10-52 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Put these four into the purchase order and the Made to Order argument after delivery becomes arithmetic, priced at USD 10-52 for the 50-piece Made to Order run.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as single-piece foam box and certified IGI report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 10-52 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Made to Order file records at USD 10-52 in single-piece foam box.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of silver assay at 92.5% minimum for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 10-52 for 50 pieces that is the number the buyer signs.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 50-piece Made to Order order at USD 10-52.
Where USD 10-52 Per Piece Actually Goes
Cost per piece at USD 10-52 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for 925 Sterling Silver Jewelry Wholesale | 30% | Alloy choice and casting yield |
| Stone or melee for 925 Sterling Silver Jewelry Wholesale | 20% | Sieve range and lot batching |
| Setting and finishing labor for 925 Sterling Silver Jewelry Wholesale | 19% | Jig design and bench minutes |
| Plating, polish and QC for 925 Sterling Silver Jewelry Wholesale | 12% | Per-tray versus per-piece checks |
| Packaging for 925 Sterling Silver Jewelry Wholesale | 19% | single-piece foam box |
A factory with no bench minutes per piece has never costed 925 Sterling Silver Jewelry Wholesale at USD 10-52. Ask for minutes and for the reject rule.
What a Report Proves and What It Does Not
The number is less interesting than the rule behind it, and 925 Sterling Silver Jewelry Wholesale is where that rule gets tested, which the Made to Order file records at USD 10-52 in single-piece foam box.
Three numbers decide it for 925 Sterling Silver Jewelry Wholesale: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and at USD 10-52 for 50 pieces that is the number the buyer signs.
We send a one-page sheet with every 925 Sterling Silver Jewelry Wholesale quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and 50 pieces leaves Wuzhou in single-piece foam box at USD 10-52.
The Sample Approval That Survives Production
Ask three suppliers of 925 Sterling Silver Jewelry Wholesale this question and you will get three answers. Only one of them survives an inspection, which the Made to Order file records at USD 10-52 in single-piece foam box.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on 925 Sterling Silver Jewelry Wholesale and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, which is how the Made to Order account reads it at USD 10-52.
We would rather lose a first order of 925 Sterling Silver Jewelry Wholesale on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, which is USD 10-52 on the Made to Order schedule.
What This Means for a First Order
A first Made to Order order of 50 pieces per design at USD 10-52 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, with IGI report and single-piece foam box stated on the same sheet, certified IGI report and packed single-piece foam box at 50 pieces.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, shipped as single-piece foam box and certified IGI report, which is how the Made to Order account reads it at USD 10-52.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, and at USD 10-52 for 50 pieces that is the number the buyer signs.
Check the count, the weight and silver assay at 92.5% minimum and plating adhesion after a 24-hour humidity test before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which is USD 10-52 on the Made to Order schedule.
How a Repeat Order Gets Built
The sequence below is fixed for a Made to Order run. The dates move with the stone lot, not with the shipping season, shipped as single-piece foam box and certified IGI report.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Made to Order shipment, the figure being USD 10-52 for a 50-piece run.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 10-52.
How long does a reorder of the same 925 Sterling Silver Jewelry Wholesale take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 10-52 on the Made to Order schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white 925 Sterling Silver Jewelry Wholesale, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Made to Order file records at USD 10-52 in single-piece foam box.
How is 925 Sterling Silver Jewelry Wholesale packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 10-52 per piece in single-piece foam box.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 10-52.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Made to Order, certified IGI report and packed single-piece foam box at 50 pieces.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and 50 pieces leaves Wuzhou in single-piece foam box at USD 10-52.
Related reading: 925 Sterling Silver Jewelry Wholesale Private Label Carton: Alloy, Karat and the Cost - HOLYCOME 925 Sterling Silver Jewelry Wholesale Q4 Holiday Stock: Sample to Container: The Real - HOLYCOME
