Bracelets
Bracelets Distributor Tier: What the Quote Actually Covers - HOLYCOME
Bracelets: tolerances, cost structure and the reject rule for US wholesale buyers.
What the Quote Actually Covers
The brief was simple: 800 bracelets, 14K gold, delivered before June. The run that arrived carried 17 pieces with clasp torsion failure, and the buyer spent USD 25-75 on sorting before the goods reached a shelf, which is how the Distributor Tier account reads it at USD 32-209.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and clasp torsion failure is what a photograph fails to define, the figure being USD 32-209 for a 800-piece run.
The fix cost about 20 seconds per bracelet and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, shipped as bulk carton, 50 per bag and certified SGS batch report, quoted at USD 32-209 per piece in bulk carton, 50 per bag.
Where USD 32-209 Per Piece Actually Goes
Cost per piece at USD 32-209 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for bracelets | 30% | Alloy choice and casting yield |
| Stone or melee for bracelets | 20% | Sieve range and lot batching |
| Setting and finishing labor for bracelets | 19% | Jig design and bench minutes |
| Plating, polish and QC for bracelets | 12% | Per-tray versus per-piece checks |
| Packaging for bracelets | 19% | bulk carton, 50 per bag |
A factory with no bench minutes per piece has never costed bracelets at USD 32-209. Ask for minutes and for the reject rule.
What US buyers Check Before They Sign
Four lines decide whether bracelets at USD 32-209 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Put these four into the purchase order and the Distributor Tier argument after delivery becomes arithmetic, shipped as bulk carton, 50 per bag and certified SGS batch report.
Distributor Pricing Tiers on bracelets
A distributor does not buy a bracelet, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, on a 800-piece Distributor Tier order at USD 32-209.
Turn is the number the distributor manages. At USD 32-209 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of bracelets move in 800-piece lots rather than in the 50-piece sample quantity.
The Three Failures We See Most in Incoming Samples
clasp torsion failure
A box clasp rated for a necklace fails under wrist rotation. The clasp has to be tested in torsion, not only in pull, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.
In a 800-piece run this typically shows on 17 of pieces. Catching it means measuring clasp torsion resistance at the tray level, not inspecting the finished carton, the figure being USD 32-209 for a 800-piece run.
link gap growth
Gaps between links grow when the connecting pin is 0.05 mm under size. A pin gauge on every tenth piece catches it cheaply, on a 800-piece Distributor Tier order at USD 32-209.
The commercial effect is clasp replacement plus reship, typically USD 9-15 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
length drift on bangles
A bangle that measures 6.9 inch instead of 7.0 slides differently on the wrist. Oval versus round form changes the fit even at the same number, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Our countermeasure is a gauge and a written limit. It adds about 20 seconds per piece and removes the defect from the run rather than from the carton, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 32-209 for a 800-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-209 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of clasp torsion resistance for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 32-209.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, quoted at USD 32-209 per piece in bulk carton, 50 per bag.
Sample to Container: The Real Calendar
The short version for bracelets: it is arithmetic, not relationship. The long version is below, shipped as bulk carton, 50 per bag and certified SGS batch report.
One practical note on timing for bracelets: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, and at USD 32-209 for 800 pieces that is the number the buyer signs.
We date the bracelets proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and the Distributor Tier quote for it sits at USD 32-209.
AQL, Tray Checks and What a QC Report Should Say
Every year we see the same omission in bracelets spec sheets, and every year it costs a buyer a season, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.
In the American bridal market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For bracelets, we publish the figure per SKU and hold it for the order window rather than for the calendar year, priced at USD 32-209 for the 800-piece Distributor Tier run.
Practically, it shows up in three places for bracelets: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, priced at USD 32-209 for the 800-piece Distributor Tier run.
How a Repeat Order Gets Built
The sequence below is fixed for a Distributor Tier run. The dates move with the stone lot, not with the shipping season, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Distributor Tier shipment, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 32-209.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, which is how the Distributor Tier account reads it at USD 32-209.
Check the count, the weight and clasp torsion resistance and overall length within +/-3 mm before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
What This Means for a First Order
A first Distributor Tier order of 50 pieces per design at USD 32-209 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces, shipped as bulk carton, 50 per bag and certified SGS batch report.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bracelets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 32-209.
How is bracelets packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Distributor Tier account reads it at USD 32-209.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, shipped as bulk carton, 50 per bag and certified SGS batch report.
How long does a reorder of the same bracelet take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which the Distributor Tier file records at USD 32-209 in bulk carton, 50 per bag.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white bracelets, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, on a 800-piece Distributor Tier order at USD 32-209.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Distributor Tier, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, and at USD 32-209 for 800 pieces that is the number the buyer signs.
Related reading: Bracelets Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME Necklaces Shopify DTC: How the Second Order Becomes Cheaper - HOLYCOME
