Factory-direct wholesale since 2016-09-06 · MOQ from 20 pcs · IGI & GRA certified

Earrings

Earrings Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME

Holycome Trade Desk · November 9, 2026 · 9 min read

Earrings: tolerances, cost structure and the reject rule for US wholesale buyers.

Earrings Vermeil Upgrade: What a Report Proves and What It Does Not - HOLYCOME

Vermeil and Gold Plating Specs for earrings

Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, and at USD 60-336 for 100 pieces that is the number the buyer signs.

We run 3 microns on earrings for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

Earrings wholesale piece from the HOLYCOME line in Wuzhou

The cost difference is real: the USD 60-336 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.

Why the Vermeil Upgrade Quote Looks Cheap Until It Lands

In October, a US buyer of earrings ordered 100 earrings and asked for the same lost-wax cast as a competitor's sample. What arrived matched the photo and missed the drawing, and 13 pieces had to be reworked at the buyer's expense, on a 100-piece Vermeil Upgrade order at USD 60-336.

Nothing in that rejection was exotic. At USD 60-336 per piece and 100 pieces on the order, a prong geometry rate of two percent is a costing error rather than a quality mystery.

Cost of the fix was about 22 seconds per piece. On 100 pieces that is a few hours at the bench and the whole claim file disappears, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

Earrings setting and finish detail on a HOLYCOME factory sample

What Fails First on earrings

prong geometry

A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.

The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

rhodium burn-off

A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, and the Vermeil Upgrade quote for it sits at USD 60-336.

Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, certified GRA report and packed retail box with care card at 100 pieces.

size-step drift

A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, which is USD 60-336 on the Vermeil Upgrade schedule.

In a 100-piece run this typically shows on 8 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, the figure being USD 60-336 for a 100-piece run.

What a USD 60-336 Quote Hides

The cost of a earring in the USD 60-336 band splits roughly as below. The line buyers challenge most is labor, and it is the line that decides whether the piece survives a season.

Cost lineShareWhat moves it
Base metal or alloy for earrings34%Alloy choice and casting yield
Stone or melee for earrings25%Sieve range and lot batching
Setting and finishing labor for earrings22%Jig design and bench minutes
Plating, polish and QC for earrings15%Per-tray versus per-piece checks
Packaging for earrings4%retail box with care card

If a supplier will not break out the five lines above, the number you are comparing is not a price. It is a total that somebody else assembled from assumptions, which is how the Vermeil Upgrade account reads it at USD 60-336.

The Measurements Behind a USD 60-336 Quote

Four numbers separate a 100-piece run that clears inspection from one that generates a credit note. None of them appears on the sample photo, with GRA report and retail box with care card stated on the same sheet.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost

None of these are premium features. They cost seconds per piece and they remove the reason a buyer has to inspect twice, and the Vermeil Upgrade quote for it sits at USD 60-336.

MOQ, Samples and the Balance

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, quoted at USD 60-336 per piece in retail box with care card.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 60-336 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, quoted at USD 60-336 per piece in retail box with care card.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified GRA report and packed retail box with care card at 100 pieces.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 60-336 for 100 pieces that is the number the buyer signs.

How the Second Order Becomes Cheaper

For earrings at this price band, the honest answer is a range rather than a point, and the range has a reason, which is USD 60-336 on the Vermeil Upgrade schedule.

We run this check per tray rather than per carton because the defect that matters on earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, which the Vermeil Upgrade file records at USD 60-336 in retail box with care card.

The report the buyer receives states the count per tray, the measured average and the outlier count for earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, on a 100-piece Vermeil Upgrade order at USD 60-336.

The Reject Tray Policy That Decides a Partnership

Most quotes for earrings describe the product and skip the part that decides whether the buyer makes money, priced at USD 60-336 for the 100-piece Vermeil Upgrade run.

The buyers who get the most out of earrings treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and 100 pieces leaves Wuzhou in retail box with care card at USD 60-336.

We support it directly on earrings: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, which is USD 60-336 on the Vermeil Upgrade schedule.

The Dock Check on earrings

We ship from Guangzhou or Shenzhen and pick the port on the carrier rate, not on habit. GRA report travels with the shipping documents, on a 100-piece Vermeil Upgrade order at USD 60-336.

DDP removes the duty invoice that arrives after the carton clears, which matters on a first Vermeil Upgrade order at USD 60-336.

Three steps at the dock: count against the packing list, weigh a sample tray, measure ten pieces. None needs a lab, shipped as retail box with care card and certified GRA report, with GRA report and retail box with care card stated on the same sheet.

From Spec to retail box with care card

The calendar below is what we quote on a 100-piece Vermeil Upgrade run of earrings. It starts when the spec is signed, not when the deposit clears, on a 100-piece Vermeil Upgrade order at USD 60-336.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

A first order of 50 pieces is a measurement, not a purchase. It tells you what stone retention after a 40-cycle wear test looks like from this bench, quoted at USD 60-336 per piece in retail box with care card.

A 100-Piece Test Run

At 100 pieces inside retail box with care card, the first order reads sell-through without betting the season on one model, certified GRA report and packed retail box with care card at 100 pieces.

Buyers who run that measurement before committing a season usually keep the supplier. Buyers who skip it usually pay twice for the same lesson, which is USD 60-336 on the Vermeil Upgrade schedule.

Frequently Asked Questions

How long does a reorder of the same earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as retail box with care card and certified GRA report.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, certified GRA report and packed retail box with care card at 100 pieces.

How is earrings packed for retail box with care card?

Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, the figure being USD 60-336 for a 100-piece run.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with GRA report and retail box with care card stated on the same sheet.

How long does a reorder of the same earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as retail box with care card and certified GRA report.

Next Step

If you are quoting earrings against another supplier, send that quote. We will mark the four lines where the numbers diverge and let you decide, on a 100-piece Vermeil Upgrade order at USD 60-336.

The factory behind earrings here is Wuzhou HengliLai Jewelry Co., Ltd., operating since 2009 in Wuzhou, Guangxi, at roughly 60,000 pieces a month. Reach the export desk at service@holycome.com or +86 18078079070 on WhatsApp, shipped as retail box with care card and certified GRA report.

Related reading: Earrings Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME Bracelets Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buyers - HOLYCOME

Topics: Earrings Vermeil Upgrade

Sourcing lab grown stones at wholesale?

Send us your specifications and target quantity — you will get a costed factory quotation within 12 working hours.

Request a quote

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .

Shop the guide

Wholesale items related to this guide

All products

Keep reading

Related buying guides

Get a factory quote in 12 hours

Send us your stone list or design files — we quote with real factory pricing.

Products Search Quote WhatsApp