Heart Cut Moissanite
Heart Cut Moissanite Made to Order: Carton Cube, Duty and the Freight Line That Surpr - HOLYCOME
Heart Cut Moissanite: tolerances, cost structure and the reject rule for US wholesale buyers.
Carton Cube, Duty and the Freight Line That Surprises Buyers in the Made to Order Program
A US buyer of heart Cut Moissanite came to us after 50 heart Cut Moissanite from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: double refraction read had drifted far enough that the buyer's own bench could not correct it without recutting, and at USD 35-237 for 50 pieces that is the number the buyer signs.
That rejection was avoidable at the drawing stage. Double refraction read belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, priced at USD 35-237 for the 50-piece Made to Order run.
We kept the Made to Order price and changed the four measurements that matter. The rebuild cost about 17 seconds per piece and removed the whole claim conversation, on a 50-piece Made to Order order at USD 35-237.
The Made-to-Order Path for heart Cut Moissanite
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, quoted at USD 35-237 per piece in single-piece foam box.
Twenty days is realistic for a new heart Cut Moissanite when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, which is USD 35-237 on the Made to Order schedule.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, the figure being USD 35-237 for a 50-piece run.
Three Failures That Reach the Made to Order Bench
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, and at USD 35-237 for 50 pieces that is the number the buyer signs.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, the figure being USD 35-237 for a 50-piece run.
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, which is USD 35-237 on the Made to Order schedule.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, certified IGI report and packed single-piece foam box at 50 pieces.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, certified IGI report and packed single-piece foam box at 50 pieces.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, quoted at USD 35-237 per piece in single-piece foam box.
Four Spec Lines a Made to Order Buyer Checks
The Made to Order buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, quoted at USD 35-237 per piece in single-piece foam box.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
None of the four adds cost at USD 35-237. They add about 17 seconds per piece and remove the reason to inspect twice.
Terms Behind a Made to Order Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, shipped as single-piece foam box and certified IGI report.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 35-237 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which the Made to Order file records at USD 35-237 in single-piece foam box.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Made to Order account reads it at USD 35-237.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, on a 50-piece Made to Order order at USD 35-237.
Cost Split on a Made to Order Piece at USD 35-237
At USD 35-237 per piece for heart Cut Moissanite, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for heart Cut Moissanite | 32% | Alloy choice and casting yield |
| Stone or melee for heart Cut Moissanite | 23% | Sieve range and lot batching |
| Setting and finishing labor for heart Cut Moissanite | 21% | Jig design and bench minutes |
| Plating, polish and QC for heart Cut Moissanite | 14% | Per-tray versus per-piece checks |
| Packaging for heart Cut Moissanite | 10% | single-piece foam box |
The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, which is how the Made to Order account reads it at USD 35-237.
What a Report Proves and What It Does Not
A buyer who understands this about heart Cut Moissanite negotiates differently, and usually negotiates less, quoted at USD 35-237 per piece in single-piece foam box.
Three numbers decide it for heart Cut Moissanite: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, quoted at USD 35-237 per piece in single-piece foam box.
We send a one-page sheet with every heart Cut Moissanite quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, shipped as single-piece foam box and certified IGI report.
The Sample Approval That Survives Production
For heart Cut Moissanite at this price band, the honest answer is a range rather than a point, and the range has a reason, the figure being USD 35-237 for a 50-piece run.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on heart Cut Moissanite and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, on a 50-piece Made to Order order at USD 35-237.
We would rather lose a first order of heart Cut Moissanite on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
The First Made to Order Order
Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, on a 50-piece Made to Order order at USD 35-237.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Made to Order run, priced at USD 35-237 for the 50-piece Made to Order run.
Getting single-piece foam box to the American bridal market
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the American bridal market, shipped as single-piece foam box and certified IGI report, and 50 pieces leaves Wuzhou in single-piece foam box at USD 35-237.
FOB is the default and DDP is the option. Buyers new to the American bridal market usually take DDP once and then switch after they see the breakdown, and at USD 35-237 for 50 pieces that is the number the buyer signs.
At receiving, count cartons, weigh one tray and measure ten pieces against color consistency within one lot. Twenty minutes here saves a season of returns, which is USD 35-237 on the Made to Order schedule.
The Calendar Behind a Made to Order Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on heart Cut Moissanite at USD 35-237.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, the figure being USD 35-237 for a 50-piece run.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 35-237.
How long does a reorder of the same heart Cut Moissanite take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, which is USD 35-237 on the Made to Order schedule.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white heart Cut Moissanite, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, and at USD 35-237 for 50 pieces that is the number the buyer signs.
How is heart Cut Moissanite packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 35-237 per piece in single-piece foam box.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, and the Made to Order quote for it sits at USD 35-237.
Next Step
If the USD 35-237 band fits the shelf, send a drawing and we quote the 50-piece Made to Order run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across heart Cut Moissanite and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, which is how the Made to Order account reads it at USD 35-237.
Related reading: Heart Cut Moissanite Private Label Carton: Alloy, Karat and the Cost of a Color Chang - HOLYCOME Heart Cut Moissanite Q4 Holiday Stock: Sample to Container: The Real Calendar - HOLYCOME
