Marquise Cut Moissanite
Marquise Cut Moissanite Bridal Boutique: The Reject Tray Policy That Decides a Partne - HOLYCOME
Marquise Cut Moissanite: tolerances, cost structure and the reject rule for US wholesale buyers.
The Reject Tray Policy That Decides a Partnership
Last August, a US buyer of marquise Cut Moissanite placed 50 marquise Cut Moissanite against a sample signed in January. The first container landed with 9 pieces that failed on double refraction read alone, and USD 20-70 landed on the buyer's P&L before a single unit sold, the figure being USD 32-218 for a 50-piece run.
On a 50-piece order at USD 32-218, a double refraction read rate above two percent is not a quality surprise. It is a costing error that shows up as a credit note three weeks later.
Nothing in the rebuild was expensive. A gauge, a written limit and a retained tray did the work that a discount would only have delayed, and at USD 32-218 for 50 pieces that is the number the buyer signs.
What US buyers Check Before They Sign
At USD 32-218 per piece the four measurements below are worth more than the discount being negotiated. One of them costs nothing to write down.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
Write these into the Bridal Boutique purchase order and the arrival check becomes arithmetic instead of recollection, and at USD 32-218 for 50 pieces that is the number the buyer signs.
The Three Failures We See Most in Incoming Samples
girdle chipping
Stones set with a tight prong and no seat cut chip at the girdle during setting. The chip appears after shipping, not on the bench, quoted at USD 32-218 per piece in two-piece bridal box.
Our countermeasure is a gauge and a written limit. It adds about 17 seconds per piece and removes the defect from the run rather than from the carton, and the Bridal Boutique quote for it sits at USD 32-218.
double refraction read
Moissanite shows doubled facet reflections under a loupe. Buyers who compare it to diamond without disclosing this face a return, not a defect, and the Bridal Boutique quote for it sits at USD 32-218.
In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring color consistency within one lot at the tray level, not inspecting the finished carton, priced at USD 32-218 for the 50-piece Bridal Boutique run.
color batch drift
Two lots graded near-colorless can sit two shades apart under daylight. Batch the stone buy per order rather than across quarters, which the Bridal Boutique file records at USD 32-218 in two-piece bridal box.
The commercial effect is stone swap and a disclosure issue, typically USD 12-20 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 32-218.
Where USD 32-218 Per Piece Actually Goes
Cost at USD 32-218 leaves no room for assumption. The table shows which line compresses and which line only moves quality down.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for marquise Cut Moissanite | 30% | Alloy choice and casting yield |
| Stone or melee for marquise Cut Moissanite | 20% | Sieve range and lot batching |
| Setting and finishing labor for marquise Cut Moissanite | 19% | Jig design and bench minutes |
| Plating, polish and QC for marquise Cut Moissanite | 12% | Per-tray versus per-piece checks |
| Packaging for marquise Cut Moissanite | 19% | two-piece bridal box |
A factory that cannot state its bench minutes per piece has never costed its own line. Ask for minutes and for the reject rule, not for a discount, priced at USD 32-218 for the 50-piece Bridal Boutique run.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Bridal Boutique order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and at USD 32-218 for 50 pieces that is the number the buyer signs.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-218 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the two-piece bridal box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, priced at USD 32-218 for the 50-piece Bridal Boutique run.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of color consistency within one lot for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, on a 50-piece Bridal Boutique order at USD 32-218.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, certified IGI report and packed two-piece bridal box at 50 pieces.
Bridal Boutique Consignment and the Sample Tray
A bridal account buys a sample tray first and stock later. The tray has to cover the sizes the boutique actually fits, which in practice means one sample in each half size from five to eight, so eight pieces per design rather than one, shipped as two-piece bridal box and certified IGI report.
Consignment terms change what you order. A boutique that takes marquise Cut Moissanite on consignment wants a marked retail price on the tag, an exchange window, and a certificate in the box the bride can photograph. We supply the IGI report in a card sleeve for exactly that reason, with IGI report and two-piece bridal box stated on the same sheet.
The calendar matters more than the price. Brides buy between January and April for a summer wedding, so the tray has to be on the counter by December. A March order arrives after the decision has already been made, the figure being USD 32-218 for a 50-piece run.
MOQ, Mixed Designs and the Real First Order
For marquise Cut Moissanite at this price band, the honest answer is a range rather than a point, and the range has a reason, certified IGI report and packed two-piece bridal box at 50 pieces.
The buyers who get the most out of marquise Cut Moissanite treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, and at USD 32-218 for 50 pieces that is the number the buyer signs.
We support it directly on marquise Cut Moissanite: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, priced at USD 32-218 for the 50-piece Bridal Boutique run.
Sample to Container: The Real Calendar
Most quotes for marquise Cut Moissanite describe the product and skip the part that decides whether the buyer makes money, and at USD 32-218 for 50 pieces that is the number the buyer signs.
What buyers underestimate on marquise Cut Moissanite is the cost of the interruption, not the cost of the piece. A missing 6% of a run stalls a launch, and a stalled launch costs more than the 6% ever did, the figure being USD 32-218 for a 50-piece run.
We plan a 3-5% buffer on first runs of marquise Cut Moissanite and tell the buyer it exists. Hiding a buffer and shipping it as production is how a supplier trains a buyer to distrust the count, and at USD 32-218 for 50 pieces that is the number the buyer signs.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air lands in 5-8 days on the US west coast, 7-10 on the east, and sea takes roughly three times the transit, which is how the Bridal Boutique account reads it at USD 32-218.
FOB is the default on marquise Cut Moissanite and DDP is the option. Buyers new to US e-commerce usually take DDP once, then switch after they see the breakdown, which the Bridal Boutique file records at USD 32-218 in two-piece bridal box.
If double refraction read appears in the arrival check, the retained tray decides who owns it. Keep the IGI report batch sheet in the same folder as the packing list, quoted at USD 32-218 per piece in two-piece bridal box.
How a Repeat Order Gets Built
Nothing in this sequence is unusual, and that is the point. Each step exists because skipping it produced a specific failure on a previous order, and the Bridal Boutique quote for it sits at USD 32-218.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders inside this sequence run 12-15 days because the model, the gauge set and the signed spec stay in our system, and 50 pieces leaves Wuzhou in two-piece bridal box at USD 32-218.
What This Means for a First Order
A first Bridal Boutique order of 50 pieces per design at USD 32-218 tests the line rather than the range. Three designs covers the shelf.
Ask for the retained tray and the IGI report batch sheet with the first shipment. Both are free and both decide the reorder, on a 50-piece Bridal Boutique order at USD 32-218.
Frequently Asked Questions
Do you supply certificates for marquise Cut Moissanite?
IGI report on marquise Cut Moissanite above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of color consistency within one lot, which is what a counter or a listing actually needs, which is USD 32-218 on the Bridal Boutique schedule.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if double refraction read shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, which the Bridal Boutique file records at USD 32-218 in two-piece bridal box.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, shipped as two-piece bridal box and certified IGI report.
What is the minimum order for marquise Cut Moissanite?
50 pieces per marquise Cut Moissanite. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, the figure being USD 32-218 for a 50-piece run.
Do you supply certificates for marquise Cut Moissanite?
IGI report on marquise Cut Moissanite above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of color consistency within one lot, which is what a counter or a listing actually needs, which is USD 32-218 on the Bridal Boutique schedule.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070, subject Bridal Boutique, and at USD 32-218 for 50 pieces that is the number the buyer signs.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which is USD 32-218 on the Bridal Boutique schedule.
Related reading: Marquise Cut Moissanite Distributor Tier: What the Quote Actually Covers - HOLYCOME Emerald Cut Moissanite Amazon FBA Ready: The Sample Approval That Survives Production - HOLYCOME
