Jewelry Tools
Jewelry Tools Valentine Program: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME
Jewelry Tools: tolerances, cost structure and the reject rule for US wholesale buyers.
AQL, Tray Checks and What a QC Report Should Say
Last May, a US buyer of jewelry Tools placed 300 jewelry Tools against a sample signed in September. The first container landed with 9 pieces that failed on prong geometry alone, and USD 30-85 landed on the buyer's P&L before a single unit sold, which is how the Valentine Program account reads it at USD 42-235.
The incoming report named prong geometry and the purchase order did not. On a Valentine Program run that gap between documents is the whole reason a tray fails inspection, shipped as heart gift box and certified IGI report.
We did not touch the retail price. We changed what travels with the heart gift box carton, and the Valentine Program account stopped re-inspecting every tray, which the Valentine Program file records at USD 42-235 in heart gift box.
What US buyers Check Before They Sign
A quote for jewelry Tools usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, which the Valentine Program file records at USD 42-235 in heart gift box.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
| Plating thickness | Nominal only | 0.20 micron rhodium logged per lot, 3 microns on vermeil | Wear-through inside one season |
| Surface porosity after polish | Seen after plating | Cast porosity checked before plating, rejects pulled at that stage | Plating blister six weeks later |
Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about jewelry Tools, quoted at USD 42-235 per piece in heart gift box.
Where USD 42-235 Per Piece Actually Goes
At USD 42-235 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for jewelry Tools | 30% | Alloy choice and casting yield |
| Stone or melee for jewelry Tools | 20% | Sieve range and lot batching |
| Setting and finishing labor for jewelry Tools | 19% | Jig design and bench minutes |
| Plating, polish and QC for jewelry Tools | 12% | Per-tray versus per-piece checks |
| Packaging for jewelry Tools | 19% | heart gift box |
A supplier with no bench minutes per piece has never costed jewelry Tools. Ask for minutes and the reject rule before you ask for a discount, the figure being USD 42-235 for a 300-piece run.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 300-piece Valentine Program order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is USD 42-235 on the Valentine Program schedule.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 42-235 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the heart gift box format at 300 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, the figure being USD 42-235 for a 300-piece run.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of stone retention after a 40-cycle wear test for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, quoted at USD 42-235 per piece in heart gift box.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 42-235 for the 300-piece Valentine Program run.
The Three Failures We See Most in Incoming Samples
prong geometry
A prong that grips the girdle instead of the pavilion survives the showroom and fails the third ultrasonic clean. The seat has to be cut to the pavilion angle before the prongs close, shipped as heart gift box and certified IGI report.
In a 300-piece run this typically shows on 14 of pieces. Catching it means measuring stone retention after a 40-cycle wear test at the tray level, not inspecting the finished carton, which is how the Valentine Program account reads it at USD 42-235.
rhodium burn-off
A 0.05 micron rhodium layer reads white in the tray and shows yellow at the shank in six months of daily wear. Thickness, not bath chemistry, is the variable that matters, quoted at USD 42-235 per piece in heart gift box.
The commercial effect is a return shipment plus a resize labor claim, typically USD 9-14 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified IGI report and packed heart gift box at 300 pieces.
size-step drift
A run gauged at size 6 and estimated elsewhere ships a size 8 that measures 7.75. The mismatch shows up as a resize queue two weeks after launch, and the Valentine Program quote for it sits at USD 42-235.
Our countermeasure is a gauge and a written limit. It adds about 22 seconds per piece and removes the defect from the run rather than from the carton, which is USD 42-235 on the Valentine Program schedule.
AQL, Tray Checks and What a QC Report Should Say
Every year we see the same omission in jewelry Tools spec sheets, and every year it costs a buyer a season, the figure being USD 42-235 for a 300-piece run.
At 300 pieces the arithmetic on jewelry Tools changes: the fixed costs spread, the variable costs do not. That is why the second order prices better than the first even when the gold fix has moved up, which the Valentine Program file records at USD 42-235 in heart gift box.
We quote both a first-run price and a reorder price for jewelry Tools on the same sheet so the buyer can see where the curve flattens. Most flatten by the third run, and the Valentine Program quote for it sits at USD 42-235.
Carton Cube, Duty and the Freight Line That Surprises Buyers
The number is less interesting than the rule behind it, and jewelry Tools is where that rule gets tested, and at USD 42-235 for 300 pieces that is the number the buyer signs.
One practical note on timing for jewelry Tools: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, the figure being USD 42-235 for a 300-piece run.
We date the jewelry Tools proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, with IGI report and heart gift box stated on the same sheet.
Valentine Window for jewelry Tools
The Valentine window is short and unforgiving: stock has to be in the warehouse by the last week of January or the season is gone. That puts the production order in the second week of December, ahead of the Lunar New Year slowdown, which is how the Valentine Program account reads it at USD 42-235.
Paired designs move better than single pieces here. A matching pair of jewelry Tools, boxed together with two cards, converts at the same retail price as two singles and costs about nine percent more to make, which is how the Valentine Program account reads it at USD 42-235.
Photography has to be red-and-white neutral. A jewelry Tool shot on a red silk background reads as a gift in a listing thumbnail, and that is the only image most buyers will ever see, which is how the Valentine Program account reads it at USD 42-235.
How a Repeat Order Gets Built
Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of jewelry Tools, shipped as heart gift box and certified IGI report, which is USD 42-235 on the Valentine Program schedule.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Valentine Program runs, and at USD 42-235 for 300 pieces that is the number the buyer signs.
What This Means for a First Order
A first order of 50 pieces per design is a measurement, not a purchase. It shows how stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm behaves on this line and whether the QC sheet matches the carton, priced at USD 42-235 for the 300-piece Valentine Program run.
Six weeks of testing is cheaper than a season of returns on jewelry Tools. That is the entire argument for a small first order, and the Valentine Program quote for it sits at USD 42-235.
Freight, Duty and the Arrival Check
At 300 pieces the carton count drives freight more than the weight. heart gift box packs tighter than a display tray and saves a pallet position, which is how the Valentine Program account reads it at USD 42-235.
FOB Guangzhou or Shenzhen is the default on jewelry Tools. Buyers new to the US market take DDP once and switch after they see the breakdown, on a 300-piece Valentine Program order at USD 42-235.
If prong geometry shows in the arrival check, the retained tray decides ownership. Keep the IGI report sheet beside the packing list, certified IGI report and packed heart gift box at 300 pieces.
Frequently Asked Questions
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 300 pieces leaves Wuzhou in heart gift box at USD 42-235.
What is the minimum order for jewelry Tools?
50 pieces per jewelry Tool. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 42-235 per piece in heart gift box.
Do you supply certificates for jewelry Tools?
IGI report on jewelry Tools above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of stone retention after a 40-cycle wear test, which is what a counter or a listing actually needs, and at USD 42-235 for 300 pieces that is the number the buyer signs.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if prong geometry shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and 300 pieces leaves Wuzhou in heart gift box at USD 42-235.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 300 pieces leaves Wuzhou in heart gift box at USD 42-235.
Next Step
Put your current quote beside ours on stone retention after a 40-cycle wear test and prong tip height within +/-0.10 mm, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, and 300 pieces leaves Wuzhou in heart gift box at USD 42-235.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which the Valentine Program file records at USD 42-235 in heart gift box.
Related reading: All Products Made to Order: Carton Cube, Duty and the Freight Line That Surprises Buy - HOLYCOME All Products Trade Show Sample: MOQ, Mixed Designs and the Real First Order - HOLYCOME
